Brother HL-1270N – Driver Download, Setup and User Guide

Advertisement

Detailed Guide to Setting Up the Brother HL-1270N

Unboxing and Assembly

  1. Remove the printer from the box and place it on a flat, stable surface.
  2. Open the front cover and remove the toner cartridge. Shake the toner cartridge gently from side to side to distribute the toner evenly.
  3. Insert the toner cartridge back into the printer and close the front cover.
  4. Connect the power cord to the printer and a power outlet.

Network Configuration

  1. Wired Connection: Connect an Ethernet cable from the back of the printer to a router or network switch.
  2. Wireless Connection:
    • Press the “WLAN” button on the printer until the orange light begins blinking.
    • On your computer, open the network settings and search for available Wi-Fi networks.
    • Select the “Brother HL-1270N” network and enter the default password “access”.
    • The printer will automatically connect to your Wi-Fi network.

Driver Installation

  1. Download the latest driver for your operating system from the Brother website: https://www.brother-usa.com/support/download
  2. Run the driver installation wizard and follow the on-screen instructions.
  3. Once the driver is installed, restart your computer.

Paper Loading

  1. Open the front cover and pull out the paper tray.
  2. Load up to 250 sheets of plain paper into the tray.
  3. Adjust the paper guides to the width of the paper.
  4. Close the front cover.

Troubleshooting Common Issues

Printing Blank Pages
* Check if the toner cartridge is properly installed.
* Replace the toner cartridge if it is low or empty.
* Ensure that the paper is properly loaded in the paper tray.

Printer Not Responding
* Check if the printer is turned on and connected to the power supply.
* Unplug the power cord from the printer and wait a few minutes before plugging it back in.
* Restart your computer and the printer.

Network Connectivity Issues
Wired Connection:
* Ensure that the Ethernet cable is securely connected to both the printer and the network device.
* Verify that the network device is functioning properly.
Wireless Connection:
* Check if the printer is within range of the wireless network.
* Ensure that the wireless password is entered correctly.
* Reset the printer’s wireless settings and reconnect to the network.

Paper Jam
* Open the back cover of the printer and gently remove any jammed paper.
* Check for any debris or obstructions in the paper path.
* Restart the printing process.

Fuser Error
* Unplug the printer and let it cool down for several hours.
* If the error persists, contact Brother support for assistance.

Download Brother HL-1270N Driver

Ensure your device is fully compatible with the latest drivers for the Brother HL-1270N. Downloading and installing the correct driver software is essential for optimal functionality and performance.

Download Driver