Brother HL-2220 Series – Driver Download, Setup and User Guide

Advertisement

Comprehensive Guide to Setting Up the Brother HL-2220 Series

Step-by-Step Setup Instructions

  1. Unpackage the Printer: Carefully remove the printer from the box and discard the packaging.
  2. Install the Toner Cartridge: Open the printer’s front cover and remove the protective wrapping from the toner cartridge. Insert the cartridge into its slot and close the cover.
  3. Connect the Power Cord: Plug the power cord into a surge-protected outlet and the printer.
  4. Connect the USB Cable (Optional): If using a USB connection, connect one end of the cable to the printer and the other end to a USB port on your computer.
  5. Load Paper: Open the paper tray, adjust the paper guides to fit the paper size you’re using, and insert the paper.
  6. Install Printer Drivers: Insert the installation disc or download the latest drivers from Brother’s website. Follow the on-screen instructions to install the drivers.
  7. Configure the Printer (Optional): Open the printer’s control panel and navigate to the “Settings” or “Preferences” menu. Adjust settings such as print quality, paper size, and duplex printing according to your preferences.

Troubleshooting Common Issues

Printer Not Printing

  • Check Power: Ensure the printer is powered on and the power cord is securely connected.
  • Check Toner Cartridge: Make sure the toner cartridge is properly installed and has sufficient toner.
  • Check Paper: Verify that the paper tray is loaded with paper and the paper size matches the settings in the printer.
  • Restart Printer: Turn off the printer, wait a few seconds, and then turn it back on.
  • Update Drivers: Ensure that the latest printer drivers are installed.

Paper Jams

  • Remove Paper: Open the printer’s covers and carefully remove any jammed paper.
  • Check Paper Guides: Adjust the paper guides to ensure the paper is aligned correctly.
  • Check for Obstructions: Inspect the paper path for any obstructions or debris.

Print Quality Issues

  • Blurry Prints: Clean the printer’s fuser assembly and rollers using a soft cloth.
  • Streaky Prints: Replace the toner cartridge.
  • Light Prints: Adjust the print density settings in the printer’s control panel or through the printer driver.
  • Verify Paper Type: Use high-quality paper designed for laser printers.

USB Connection Problems

  • Check Cable: Inspect the USB cable for any damage or loose connections.
  • Restart the Computer: Restart the computer and printer.
  • Reinstall Drivers: Uninstall and reinstall the printer drivers.
  • Disable USB Selective Suspend: Go to “Device Manager” on your computer, locate the printer under “Printers,” right-click on it and select “Properties.” Under the “Power Management” tab, uncheck “Allow the computer to turn off this device to save power.”

Other Issues

  • Printer Not Found: Double-check the USB or network connection and ensure that the printer is powered on.
  • Error Messages: Refer to Brother’s online support or user manual for specific error messages and their solutions.

Download Brother HL-2220 Series Driver

Ensure your device is fully compatible with the latest drivers for the Brother HL-2220 Series. Downloading and installing the correct driver software is essential for optimal functionality and performance.

Download Driver