Brother HL-2460N – Driver Download, Setup and User Guide

Advertisement

Detailed Guide to Setting Up the Brother HL-2460N Printer

Step 1: Unboxing and Setup

  1. Unpack the printer and remove all packaging materials.
  2. Remove the orange protective tape from the toner cartridge.
  3. Insert the toner cartridge into the printer until it clicks into place.
  4. Close the front cover of the printer.
  5. Connect the power cord to the printer and an electrical outlet.

Step 2: Network Configuration

  1. Ensure your computer and printer are connected to the same network.
  2. Press the “Menu” button on the printer’s control panel.
  3. Use the arrow keys to select “Network Setup” and press “OK”.
  4. Select “Wireless Setup” or “Ethernet Setup” based on your connection type.
  5. Follow the on-screen prompts to complete the network configuration.

Step 3: Installing Drivers

  1. Insert the included software CD-ROM into your computer.
  2. Run the installation wizard and follow the on-screen instructions.
  3. Select “Network Printer” during the installation process.
  4. Select the Brother HL-2460N printer from the list of available printers.
  5. Complete the driver installation and create a shortcut on your desktop.

Troubleshooting Common Issues

1. Printer Not Responding

  • Ensure the printer is turned on and connected to power.
  • Check the network connection and ensure both the printer and computer are connected to the same network.
  • Restart the printer by unplugging it from the power outlet and plugging it back in after 30 seconds.

2. Printing Issues

  • Verify that the toner cartridge has been installed correctly.
  • Check the paper tray and ensure it contains paper.
  • Adjust the paper size settings in the printer driver to match the paper size in the tray.
  • Clean the printhead by following the instructions in the printer’s user manual.

3. Network Connection Problems

  • Ensure the printer is connected to the network via Ethernet cable or Wi-Fi.
  • Check the network settings on the printer’s control panel to verify the IP address and subnet mask.
  • If using Wi-Fi, ensure the router is broadcasting the correct SSID and password.
  • Reset the printer’s network settings by pressing and holding the “Cancel” button on the control panel for 5 seconds.

4. Device Not Recognized

  • Reinstall the printer drivers by following the steps in “Step 3: Installing Drivers”.
  • Check if the printer is turned on and connected to the computer.
  • Verify the USB cable is securely connected between the printer and computer.
  • If using a shared printer, ensure the printer is properly shared on the network.

5. Other Issues

  • Toner Cartridge Problems: Replace the toner cartridge if the “Toner Empty” message appears or print quality is poor.
  • Paper Jams: Remove the paper from the paper tray, clear the jam, and reload the paper.
  • Error Messages: Consult the printer’s user manual for the meaning of specific error messages and troubleshooting steps.

Download Brother HL-2460N Driver

Ensure your device is fully compatible with the latest drivers for the Brother HL-2460N. Downloading and installing the correct driver software is essential for optimal functionality and performance.

Download Driver