Brother HL-4Ve – Driver Download, Setup and User Guide

Advertisement

Setting Up the Brother HL-4Ve: A Comprehensive Guide

Unboxing and Assembly

  1. Carefully unpack the printer and remove all packaging materials.
  2. Remove the protective tape and foam packaging from the printer body.
  3. Locate the toner cartridge and insert it into the printer. Ensure it clicks into place.
  4. Attach the paper tray to the bottom of the printer.

Software Installation

  1. Insert the included CD-ROM into your computer’s CD drive.
  2. Follow the on-screen instructions to install the printer software.
  3. When prompted, connect the printer to your computer using the provided USB cable.

Basic Configuration

  1. Open the “Printers and Scanners” or “Printers” section in your computer’s settings.
  2. Click “Add a Printer” or “Add a Device.”
  3. Select the Brother HL-4Ve from the list of available printers.
  4. Follow the wizard to complete the setup process.

Troubleshooting Common Issues

Printer Won’t Turn On

  • Check if the power cord is properly connected to the printer and a power outlet.
  • Ensure the power switch on the printer is turned on.
  • Reset the printer by unplugging it for 30 seconds and then plugging it back in.

Printing Blank Pages

  • Verify that there is sufficient paper in the paper tray.
  • Ensure the toner cartridge is properly installed and has toner left.
  • Check the printer settings to make sure the correct paper size and type are selected.

Paper Jam

  • Carefully pull out the jammed paper from the paper tray or rear output tray.
  • If the paper is torn, remove all pieces to prevent further jams.
  • Open and close the front cover of the printer to reset the paper feed.

Lines or Smudges on Prints

  • Clean the print cartridge by shaking it gently and reinserting it.
  • Replace the print cartridge if cleaning does not resolve the issue.
  • Check the drum unit for any scratches or damage and replace it if necessary.

Errors on the Printer Display

  • “Toner Low”: Replace the toner cartridge with a new one.
  • “Drum End”: Replace the drum unit with a new one.
  • “Jam”: Clear any paper jams as described above.
  • “No Paper”: Make sure there is paper in the paper tray.

Additional Troubleshooting Tips

  • Consult the printer’s user manual for specific error codes and solutions.
  • Update the printer drivers to the latest version from the Brother website.
  • Contact Brother support for assistance if the issue persists.

Download Brother HL-4Ve Driver

Ensure your device is fully compatible with the latest drivers for the Brother HL-4Ve. Downloading and installing the correct driver software is essential for optimal functionality and performance.

Download Driver