Brother HL-660 – Driver Download, Setup and User Guide

Advertisement

Comprehensive Guide to Setting Up the Brother HL-660 Laser Printer

Step-by-Step Setup Process

  1. Unpack the Printer: Remove the HL-660 from its packaging and discard all protective materials.
  2. Install the Toner Cartridge: Open the front cover of the printer and remove the orange protective cover from the toner cartridge. Insert the cartridge into the printer and close the cover.
  3. Connect the Power Cable: Plug the power cable into the printer and a nearby electrical outlet.
  4. Connect to the Computer: Use a USB cable to connect the printer to your computer.
  5. Install Printer Drivers: Insert the included CD into your computer’s disc drive and follow the on-screen instructions to install the printer drivers.
  6. Configure Network (Optional): If you want to use the HL-660 over a network, follow these additional steps:
    • Connect an Ethernet cable from the printer to your router.
    • Print a network configuration report by pressing the “Menu” button and scrolling to “Network Config.”
    • Note the printer’s IP address from the report.
    • Configure your computer to connect to the printer by entering the IP address into the printer settings dialog box.
  7. Load Paper: Open the paper tray and insert a stack of paper. Adjust the paper guides to match the size of the paper.

Troubleshooting Common Issues

Printer Not Printing:
– Ensure the printer is turned on and connected to the computer.
– Check the printer’s status by pressing the “Menu” button.
– Reinstall the printer drivers.
– Clear any paper jams.
– Restart the printer.

Paper Jams:
– Open the printer cover and remove any jammed paper.
– Check if the paper tray is properly inserted and the paper guides are adjusted correctly.
– Try using a different type of paper.

Print Quality Problems:
– Check the toner level and replace the cartridge if necessary.
– Clean the print drum.
– Adjust the print settings on your computer.
– Try printing a test page to identify any specific issues.

Network Connection Issues:
– Verify that the Ethernet cable is securely connected at both ends.
– Ensure that your computer is connected to the same network as the printer.
– Try restarting your computer and the printer.
– Check the firewall settings on your computer to ensure it is not blocking the printer.

Other Issues:
– Printer Not Responding: Restart the printer and try printing again.
– Error Messages: Refer to the user manual or Brother’s support website for specific error codes and solutions.
– Slow Printing Speed: Check the speed settings on your computer and in the printer’s driver preferences.
– Noise During Printing: This is normal for laser printers. However, if the noise is excessive, it may indicate a mechanical issue.

Conclusion

By following these steps and troubleshooting tips, you should be able to set up and use your Brother HL-660 laser printer successfully. If you encounter any persistent issues, please contact Brother’s technical support for further assistance.

Download Brother HL-660 Driver

Ensure your device is fully compatible with the latest drivers for the Brother HL-660. Downloading and installing the correct driver software is essential for optimal functionality and performance.

Download Driver