Brother HL-L2360D Series – Driver Download, Setup and User Guide

Advertisement

Step-by-Step Guide to Setting Up the Brother HL-L2360D Series Printer

Unboxing and Assembly:

  1. Unpack the printer and remove all packaging materials.
  2. Place the printer on a stable surface near an electrical outlet.
  3. Open the front cover.
  4. Remove the toner cartridge from its packaging and insert it into the printer.
  5. Close the front cover.

Driver Installation:

  1. Connect the printer to your computer using a USB cable (not included).
  2. Turn on the printer.
  3. Insert the software CD that came with the printer into your computer’s optical drive.
  4. Follow the on-screen instructions to install the printer driver and software.
  5. Once the installation is complete, restart your computer.

Network Setup (Optional):

  1. Connect the printer to your network using an Ethernet cable (not included).
  2. Turn on the printer.
  3. Print a “Network Configuration Page” by pressing [Menu] > [Network Settings] > [Print Network Config.].
  4. The Network Configuration Page will display the printer’s IP address.
  5. Configure your computer’s network settings to connect to the printer’s IP address.

Paper Loading:

  1. Open the paper tray.
  2. Adjust the paper guides to match the size of the paper you are using.
  3. Load the paper into the tray with the printable side facing up.
  4. Close the paper tray.

Printing a Test Page:

  1. Press [Menu].
  2. Select [Print Report] > [Print Test Page].
  3. The printer will print a test page.

Troubleshooting Common Issues:

Printer not powering on:

  • Ensure that the printer is properly connected to a power outlet.
  • Check the power cord for any damage.
  • Try resetting the printer by unplugging it for 30 seconds and then plugging it back in.

Poor print quality:

  • Check if the toner cartridge is low or empty.
  • Clean the inside of the printer, including the pickup rollers and transfer belt.
  • Adjust the paper type setting in the printer driver to match the type of paper you are using.

Printer not connecting to the network:

  • Ensure that the Ethernet cable is securely connected to both the printer and the network.
  • Check your network settings to ensure that the printer is on the same network as your computer.
  • Reset the printer’s network settings by pressing [Menu] > [Network Settings] > [Reset Network Settings].

Paper jams:

  • Open the paper tray and remove any jammed paper.
  • Check the inside of the printer for any torn or stuck paper.
  • Reload the paper and try printing again.

Error messages:

  • Refer to the printer’s User Guide for specific error messages and their corresponding solutions.
  • Contact Brother Support for assistance with resolving persistent error messages.

Download Brother HL-L2360D Series Driver

Ensure your device is fully compatible with the latest drivers for the Brother HL-L2360D Series. Downloading and installing the correct driver software is essential for optimal functionality and performance.

Download Driver