Brother MFC-8810DW – Driver Download, Setup and User Guide

Advertisement

Guide to Setting Up the Brother MFC-8810DW Wireless Printer

1. Unboxing and Initial Setup

  • Remove the printer from the box and place it on a flat surface.
  • Remove all protective materials and packaging.
  • Connect the power cord to the printer and to an outlet.

2. Installing the Starter Toner Cartridge

  • Open the front cover of the printer.
  • Remove the protective orange cap and foam from the toner cartridge.
  • Insert the toner cartridge into the designated slot until it clicks into place.
  • Close the front cover.

3. Connecting Wireless

Option A: Using the Control Panel

  • Press the “Menu” button on the printer’s control panel.
  • Scroll down and select “Network,” then “Wireless LAN.”
  • Choose “Wireless Setup Wizard” and follow the on-screen instructions to connect to your Wi-Fi network.

Option B: Using Wi-Fi Direct

  • On the printer’s control panel, press “Menu,” then “Network” and “Wi-Fi Direct.”
  • Select “On” and note the displayed password.
  • On your computer or mobile device, connect to the Wi-Fi network named “Brother-XXXX,” where “XXXX” is the last four characters of the printer’s serial number.
  • Enter the password displayed on the printer’s screen.

4. Installing Software

Option A: CD Installation

  • Insert the included CD into your computer’s CD-ROM drive.
  • Follow the on-screen instructions to install the software.

Option B: Download and Install

  • Visit the Brother website and download the latest software for your printer model.
  • Double-click on the downloaded file to start the installation process.
  • Follow the on-screen instructions to complete the installation.

5. Configuring the Printer

  • Open the printer software on your computer.
  • Select “Printer Settings” or “Device Settings.”
  • Configure the following options:
    • Paper size and type
    • Duplex printing (double-sided printing)
    • Scan resolution
    • Fax settings

Troubleshooting Common Issues

1. Printer Not Connecting to Wi-Fi

  • Ensure your Wi-Fi network is active and accessible.
  • Check if the printer is within range of your router.
  • Restart the printer by turning it off and then back on.
  • Reset the printer’s network settings by pressing and holding the “Cancel” button on the control panel for approximately 5 seconds.

2. Printing Issues

  • Verify that paper is loaded correctly in the printer’s paper tray.
  • Check if the toner cartridge is installed properly and has toner.
  • Clean the print heads by following the instructions in the printer’s user manual.
  • Reset the printer to factory settings by pressing and holding the “Menu” and “OK” buttons on the control panel simultaneously for approximately 5 seconds.

3. Scanning Issues

  • Ensure the document is placed correctly on the scanner bed.
  • Check if the scanner driver is installed and running on your computer.
  • Clean the scanner glass using a soft cloth.
  • Reset the printer by turning it off and then back on.

4. Faxing Issues

  • Confirm that the fax line is connected correctly.
  • Check if the fax number you are sending to is correct.
  • Verify that the recipient’s fax machine is turned on and receiving faxes.
  • Reset the printer by turning it off and then back on.

5. Software Installation Errors

  • Ensure your computer meets the system requirements for the software.
  • Close any other programs running on your computer before installing the software.
  • Restart your computer after the software installation is complete.
  • If the issue persists, contact Brother customer support.

Download Brother MFC-8810DW Driver

Ensure your device is fully compatible with the latest drivers for the Brother MFC-8810DW. Downloading and installing the correct driver software is essential for optimal functionality and performance.

Download Driver