Brother MFC-9600 – Driver Download, Setup and User Guide

Advertisement

Comprehensive Guide to Setting Up the Brother MFC-9600

Unboxing and Preparation

  • Unpack the printer and remove all protective materials.
  • Place the printer on a flat, stable surface.
  • Connect the power cord to the printer and an electrical outlet.

Hardware Setup

Connecting to a Computer:

  • USB: Connect a USB cable from the printer to an available USB port on your computer.
  • Network: Refer to the user manual for instructions on connecting the printer to a wired or wireless network.

Installing Ink Cartridges:

  • Open the printer cover and remove the empty ink cartridges.
  • Remove the protective tape from the new ink cartridges.
  • Insert the new ink cartridges into their respective slots and push down until they click into place.

Software Installation

  • Insert the installation CD into your computer’s CD-ROM drive.
  • Follow the on-screen instructions to install the printer drivers and software.
  • Select the connection type (USB or network) when prompted.

Printer Configuration

Setting Up Paper:

  • Open the paper tray and load paper into it.
  • Adjust the paper guides to fit the paper size.

Changing Print Settings:

  • Open the “Printers & Scanners” settings on your computer.
  • Select the Brother MFC-9600 printer.
  • Go to “Printers Properties” and adjust the print settings, such as paper size, orientation, and quality.

Scanning Documents:

  • Place the document on the scanner glass.
  • Press the “Scan” button on the printer control panel.
  • Select the desired scan settings and press “Start.”

Troubleshooting Common Issues

Printer Not Printing:

  • Check if the printer is turned on and connected to power.
  • Ensure the printer is connected to the computer correctly (USB or network).
  • Check if there is paper in the paper tray.
  • Clean the print heads by following the instructions in the user manual.

Scanner Not Scanning:

  • Verify that the document is correctly placed on the scanner glass.
  • Make sure the scanner driver is installed on your computer.
  • Clean the scanner glass with a soft cloth.

Ink Cartridge Problems:

  • Replace empty or low ink cartridges with new ones.
  • Ensure the ink cartridges are inserted correctly.
  • Clean the ink cartridge contacts with a棉签 dipped in rubbing alcohol.

Network Connectivity Issues:

  • Check if the printer is connected to the network using an Ethernet cable or Wi-Fi.
  • Ensure your computer and printer are on the same network.
  • Restart the printer and router to troubleshoot network issues.

Conclusion

By following this detailed guide, you can successfully set up the Brother MFC-9600 and enjoy its features. Remember to troubleshoot common issues if necessary and refer to the user manual for additional support.

Download Brother MFC-9600 Driver

Ensure your device is fully compatible with the latest drivers for the Brother MFC-9600. Downloading and installing the correct driver software is essential for optimal functionality and performance.

Download Driver