Brother MFC-J220 – Driver Download, Setup and User Guide

Advertisement

Detailed Guide to Setting Up Your Brother MFC-J220

Step 1: Unpack and Assemble

  1. Carefully unpack the printer and all its components.
  2. Remove the protective packaging from the printer and place it on a flat surface.
  3. Connect the included power cord to the back of the printer and a power outlet.
  4. Open the scanner bed and remove the orange protective covers. Close the scanner bed.

Step 2: Install Ink Cartridges

  1. Open the front cover of the printer.
  2. Remove the empty ink cartridges, if any.
  3. Shake the new ink cartridges gently.
  4. Insert the new ink cartridges into the correct slots as indicated by their colors. Press down firmly until they click into place.
  5. Close the front cover.

Step 3: Load Paper

  1. Pull out the paper tray at the bottom of the printer.
  2. Adjust the paper guides to fit the size and type of paper you are using.
  3. Load the paper into the tray with the print side facing up.
  4. Push the paper tray back into the printer.

Step 4: Install Software and Drivers

  1. Insert the included CD-ROM into your computer.
  2. Follow the on-screen instructions to install the software and drivers.
  3. Select your printer model when prompted.
  4. Once the installation is complete, click “Finish”.

Step 5: Connect to Wi-Fi (Optional)

Via WPS (Wi-Fi Protected Setup)

  1. Press the “Wi-Fi” button on the printer.
  2. Press and hold the “WPS” button on your Wi-Fi router for a few seconds.
  3. The printer will automatically connect to the Wi-Fi network.

Via Direct Wi-Fi Connection

  1. Press the “Wi-Fi” button on the printer.
  2. Select “Wi-Fi Direct” from the menu.
  3. On your computer or device, connect to the Wi-Fi network named “BrotherMFC-J220DIRECT”.
  4. Enter the password displayed on the printer’s screen.

Troubleshooting Common Issues

Printer Not Printing

  • Check that the printer is turned on and connected to power.
  • Ensure that the ink cartridges are installed correctly.
  • Clean the print heads by following the instructions in the printer’s manual.
  • Check that the paper is loaded correctly and the paper guides are properly adjusted.

Wi-Fi Connection Issues

  • Make sure the printer is within range of your Wi-Fi router.
  • Verify that the Wi-Fi password is correct.
  • Restart the printer and your Wi-Fi router.
  • Try connecting using the Wi-Fi Direct method instead.

Scanned Documents Not Clear

  • Clean the scanner glass using a soft, dry cloth.
  • Adjust the scanner resolution settings in the software.
  • Make sure the original document is placed correctly on the scanner bed.

Paper Jams

  • Open the back cover of the printer and carefully remove any jammed paper.
  • Check for any debris or obstructions inside the printer.
  • Restart the printer.

Additional Tips

  • Use genuine Brother ink cartridges for optimal performance.
  • Regularly clean the printer to prevent future issues.
  • Download the Brother Mobile Connect app to print and scan remotely.
  • Refer to the user manual for more detailed instructions and troubleshooting tips.

Download Brother MFC-J220 Driver

Ensure your device is fully compatible with the latest drivers for the Brother MFC-J220. Downloading and installing the correct driver software is essential for optimal functionality and performance.

Download Driver