Brother MFC-J2320 – Driver Download, Setup and User Guide

Advertisement

Detailed Guide to Setting Up Brother MFC-J2320

Unboxing and Setup

  1. Unpack the printer and remove all packaging materials.
  2. Install the ink cartridges by opening the ink cartridge cover and aligning the cartridges with the corresponding colors.
  3. Connect the printer to a power source using the included power cord.
  4. Turn on the printer by pressing the Power button.

Wireless Network Setup

Wi-Fi Protected Setup (WPS)

  1. Press and hold the WPS button on the printer and on your router/access point.
  2. The printer will automatically connect to the network.

Manual Setup

  1. On the printer’s display, navigate to the Network Menu and select Wireless LAN Setup.
  2. Select Auto Search to scan for available networks.
  3. Choose your network from the list and enter the password.
  4. Follow any additional prompts on the display to complete the setup.

Computer Connection

USB Connection

  1. Connect a USB cable (not included) to the printer and your computer.
  2. The printer will be automatically detected by your computer and the necessary drivers will be installed.

Ethernet Connection

  1. Connect an Ethernet cable (not included) to the printer and an Ethernet port on your router/network switch.
  2. The printer will automatically configure its IP address and other network settings.

Troubleshooting Common Issues

Printing Issues

  • Blank pages: Check if the ink cartridges are installed correctly and have sufficient ink. Clean the print heads according to the user manual.
  • Smudged or faded prints: Clean the print heads and nozzles. Check the paper quality and make sure it meets the printer’s specifications.
  • Paper jams: Gently remove any jammed paper from the paper tray or feed path. Reset the printer by turning it off and on.

Scanner Issues

  • Scanner not working: Check if the scanner is connected to the computer and is recognized by the scanning software. Reinstall the scanner drivers.
  • Blurry or faded scans: Clean the scanner glass with a soft, damp cloth. Adjust the scan settings to improve image quality.
  • Scanner error: Perform a power reset by unplugging the printer and plugging it back in. If the error persists, contact Brother support.

Network Issues

  • Printer not connecting to network: Verify that the printer is within range of the wireless router and that the network settings are correct. Reset the network settings on the printer and reconnect.
  • Slow or intermittent connection: Check for interference from other devices or obstructions in the signal path. Move the printer closer to the router if possible.
  • Connection drops: Update the firmware on the printer and router. Check for any network congestion or outages.

Other Issues

  • Paper not feeding: Clean the rollers inside the printer. Adjust the paper guides to ensure the paper is aligned correctly.
  • Ink smudging on copies: Use high-quality paper intended for ink jet printers. Allow copies to dry before handling them.
  • Printer making noise: Check if the printer is set to sleep mode or mute mode. Clean the print heads and nozzles to reduce friction and noise.

Download Brother MFC-J2320 Driver

Ensure your device is fully compatible with the latest drivers for the Brother MFC-J2320. Downloading and installing the correct driver software is essential for optimal functionality and performance.

Download Driver