Brother MFC-J2720 – Driver Download, Setup and User Guide

Advertisement

Setup Guide for Brother MFC-J2720

Unboxing and Assembly

  1. Remove the printer from its packaging and place it on a stable surface.
  2. Connect the power cord to the printer and a power outlet.
  3. Open the top cover and remove the protective packaging materials.
  4. Insert the ink cartridges into their designated slots, ensuring they click into place.
  5. Load paper into the main paper tray.

Software Installation

  1. Insert the included CD-ROM into your computer.
  2. Follow the on-screen instructions to install the printer drivers and software.
  3. If no CD is available, download the drivers and software from Brother’s official website.

Network Configuration (Wired/Wireless)

Wired Network:

  1. Connect an Ethernet cable from the printer’s “LAN” port to your router.
  2. Print a Network Settings Report from the printer’s menu to obtain the printer’s IP address.

Wireless Network:

  1. Press the “WLAN” button on the printer.
  2. Select the appropriate Wi-Fi network from the printer’s LCD screen and enter the password.
  3. Wait for the printer to connect to the network.

Testing and Printer Setup

  1. Print a test page to verify that the printer is working correctly.
  2. If printing fails, follow the troubleshooting steps below.
  3. Add the printer to your computer’s list of installed printers.

Troubleshooting Common Issues

Cannot Print

  • Ensure the printer is powered on and connected to power.
  • Check that the ink cartridges are properly installed and have sufficient ink.
  • Check the paper tray for paper and make sure it is not jammed.
  • Restart the printer and try again.
  • Reinstall the printer drivers and software.

Paper Jam

  • Gently pull the jammed paper out of the paper path. Do not tear it.
  • Open and close the top cover to reset the paper feed.
  • If the paper is still jammed, try turning the printer off and on again.

Wi-Fi Connection Error

  • Ensure the printer is within range of your Wi-Fi router.
  • Check that the Wi-Fi password is correct.
  • Restart the printer and router.
  • Reset the printer’s network settings (see printer’s user manual for instructions).

Ink Cartridge Issues

  • Replace low or empty ink cartridges with genuine Brother cartridges.
  • Inspect the ink cartridge contacts for any debris and clean them if necessary.
  • Reinstall the ink cartridge and make sure it clicks into place.

Other Issues

  • For any other issues, refer to the printer’s user manual or contact Brother customer support.

Download Brother MFC-J2720 Driver

Ensure your device is fully compatible with the latest drivers for the Brother MFC-J2720. Downloading and installing the correct driver software is essential for optimal functionality and performance.

Download Driver