Brother MFC-J280W – Driver Download, Setup and User Guide

Advertisement

Detailed Guide to Setting Up the Brother MFC-J280W

Installing the Printer

Step 1: Unpack the Printer

  • Remove the printer from the box and discard any packing materials.
  • Find the ink cartridges and power cord.

Step 2: Install the Ink Cartridges

  • Open the front cover of the printer.
  • Insert the colored ink cartridges into their respective slots.
  • Push down on the cartridges until they click into place.

Step 3: Connect the Power Cord

  • Plug the power cord into the printer and a power outlet.
  • Turn on the printer using the power button.

Wireless Setup

Step 1: Install the Brother Driver

  • Go to the Brother website (brother-usa.com/support) and search for the MFC-J280W driver.
  • Download and install the driver according to the instructions.

Step 2: Connect to the Printer’s Network

  • Press the Menu button on the printer.
  • Select Network and then Wireless LAN Settings.
  • Choose Manual Setup and select your wireless network from the list.
  • Enter the password for your network.

Step 3: Install the Printer on Your Computer

  • Open the Brother driver installer and follow the on-screen instructions.
  • Select your printer from the list of detected devices.
  • Click Connect to establish the wireless connection.

Troubleshooting Common Issues

Cannot Connect Wirelessly

  • Ensure that your network is functioning properly.
  • Check if the printer is close to the wireless router.
  • Restart the printer and router by unplugging them for a few minutes and then plugging them back in.

Printing Issues

  • Check if the ink cartridges are installed correctly.
  • Ensure that there is enough ink in the cartridges.
  • Clean the print head using the built-in utility in the printer menu.

Paper Jam

  • Open the front cover and remove the jammed paper.
  • Be careful not to tear the paper.
  • If the paper is stuck inside the printer, gently pull it out.

Scanner Not Working

  • Make sure the document feeder is closed properly.
  • Clean the scanner glass with a soft cloth.
  • Restart the printer and try scanning again.

Error Messages

  • Paper Jam: Clear the paper jam.
  • Ink Cartridge Not Recognized: Check if the cartridges are installed correctly.
  • Scanner Error: Restart the printer and try scanning again.
  • Service Required: Contact Brother support for further assistance.

Download Brother MFC-J280W Driver

Ensure your device is fully compatible with the latest drivers for the Brother MFC-J280W. Downloading and installing the correct driver software is essential for optimal functionality and performance.

Download Driver