Brother MFC-J650DW – Driver Download, Setup and User Guide

Advertisement

Ultimate Guide to Setting Up Your Brother MFC-J650DW

Step 1: Unboxing and Assembly

  • Open the box and carefully remove all components.
  • Place the printer on a stable surface.
  • Remove the protective materials and insert the ink cartridges.
  • Install the paper tray and load paper.
  • Connect the power cord and turn on the printer.

Step 2: Network Connection

Wireless Connection:

  • Press the “Wi-Fi” button on the printer.
  • Select the desired wireless network from the list.
  • Enter the network password.
  • Confirm the connection.

Ethernet Connection:

  • Connect an Ethernet cable from the printer’s “Ethernet” port to your router.
  • The printer will automatically obtain an IP address.

Step 3: Software Installation

  • Download the latest drivers from Brother’s website: https://support.brother.com/g/b/downloadtop.aspx?c=us&lang=en&prod=mfcj650dw_us
  • Install the drivers and software as prompted.
  • Choose the “Standard” or “Custom” installation type based on your needs.

Step 4: Configuring the Printer

Using the Printer’s Control Panel:

  • Navigate to “Menu” > “Network” > “Network Settings” > “TCP/IP Settings”
  • Set the IP address, subnet mask, and gateway (if necessary).

Using the Brother Control Center Software:

  • Open the software and select your printer.
  • Click on “Network” and configure the network settings as desired.

Common Troubleshooting Issues

Printer Not Printing:

  • Ensure the printer is powered on and connected to a power source.
  • Check if there is paper loaded in the paper tray.
  • Open the printer’s cover and confirm that the ink cartridges are properly installed.
  • Reset the printer by turning it off, waiting a minute, and turning it back on.

Wi-Fi Connection Issues:

  • Verify that the printer is within range of the wireless router.
  • Check if the router’s Wi-Fi is enabled.
  • Re-enter the network password on the printer.
  • Reset the router and the printer.

Scanning Issues:

  • Ensure that the scanner glass is clean.
  • Verify that the document is placed face down on the glass.
  • Check if the TWAIN driver is installed and enabled.
  • Restart the scanning application and try again.

Ink Cartridge Issues:

  • If an ink cartridge is low or empty, replace it with a new cartridge.
  • Ensure that the cartridge is inserted correctly and in the designated slot.
  • Clean the printhead if the ink output is faint or uneven.

Other Tips:

  • Keep the printer’s firmware up to date for optimal performance.
  • Clean the printer regularly to prevent dust and debris buildup.
  • Use genuine Brother ink cartridges for best results.
  • Refer to the user manual for additional troubleshooting assistance.

Download Brother MFC-J650DW Driver

Ensure your device is fully compatible with the latest drivers for the Brother MFC-J650DW. Downloading and installing the correct driver software is essential for optimal functionality and performance.

Download Driver