Brother MFC-L2750W – Driver Download, Setup and User Guide

Advertisement

Setting Up the Brother MFC-L2750W Wireless Printer

Step 1: Unbox and Connect Components

  • Unpack the printer and remove all packaging materials.
  • Place the printer on a flat, stable surface near an electrical outlet.
  • Connect the power cord to the printer and a power outlet.

Step 2: Install Toner Cartridge

  • Open the front cover of the printer.
  • Remove the protective orange tab from the toner cartridge.
  • Align the cartridge with the rails inside the printer and insert it until it clicks into place.
  • Close the front cover.

Step 3: Load Paper

  • Open the paper tray cover.
  • Adjust the paper guides to match the paper size you’re using.
  • Load the paper face up, aligning the edges with the guides.
  • Close the paper tray cover.

Step 4: Connect to Wi-Fi

Method 1: Using WPS (Recommended)

  • Press and hold the “Wi-Fi” button on the printer until the “Wi-Fi” indicator light starts flashing.
  • Within 2 minutes, press the WPS button on your Wi-Fi router.
  • The printer will automatically connect to the network.

Method 2: Using Wi-Fi Protected Setup (WPS)

  • On the printer’s control panel, navigate to “Menu” > “Settings” > “Network” > “Wi-Fi Setup Wizard” > “WPS Setup”.
  • Enter the WPS PIN provided by your router or Wi-Fi access point.
  • The printer will connect to the network.

Step 5: Install Drivers and Software (Optional)

  • Visit the Brother website and download the latest drivers and software for your operating system.
  • Follow the on-screen instructions to install the software.

Troubleshooting Common Issues

Printer Not Connecting to Wi-Fi

  • Ensure your printer is within range of your Wi-Fi router.
  • Check if your router’s Wi-Fi is turned on and broadcasting.
  • Reset the printer’s network settings by pressing and holding the “Cancel” and “Wi-Fi” buttons simultaneously for 5 seconds.

Print Jobs Not Printing

  • Make sure the printer is turned on and connected to a power source.
  • Check if there is paper in the paper tray.
  • Restart the printer by turning it off and then back on.
  • Ensure the printer is selected as the default printer in your computer’s settings.

Error Messages

  • Paper Jam: Open the printer’s covers and remove any jammed paper gently.
  • Toner Low: Replace the toner cartridge with a new one.
  • Drum Unit Error: Contact Brother support for assistance.
  • Service Call: Reset the printer by unplugging it for 15 seconds and then plugging it back in. If the error persists, contact Brother support.

Download Brother MFC-L2750W Driver

Ensure your device is fully compatible with the latest drivers for the Brother MFC-L2750W. Downloading and installing the correct driver software is essential for optimal functionality and performance.

Download Driver