Brother MW-145BT – Driver Download, Setup and User Guide

Advertisement

Setting Up the Brother MW-145BT Wireless Headphones

Step 1: Pairing with Your Device

  1. Turn on the headphones by pressing and holding the Power button for 3 seconds.
  2. Activate Bluetooth on your device (phone, tablet, laptop).
  3. On your device, search for available Bluetooth devices.
  4. Select “Brother MW-145BT” from the list of devices.

Step 2: Charging the Headphones

  1. Plug the included USB cable into the charging port on the headphones.
  2. Connect the other end of the cable to a USB power source (e.g., computer, wall charger).
  3. The LED indicator will turn red while charging. When fully charged, it will turn blue.

Step 3: Using the Headphones

Powering On/Off:
* Press and hold the Power button for 3 seconds to turn on.
* Press and hold the Power button for 5 seconds to turn off.

Adjusting Volume:
* Use the Volume Up (+) and Volume Down (-) buttons on the side of the headphones.

Playing/Pausing Music:
* Press the Play/Pause button on the side of the headphones.

Skipping Tracks:
* Press the Fast Forward (>>) or Rewind (<<) buttons on the side of the headphones.

Answering/Ending Calls:
* Press the Play/Pause button to answer an incoming call.
* Press and hold the Play/Pause button for 2 seconds to end a call.

Troubleshooting Common Issues

Headphones won’t turn on:
* Ensure the headphones are charged.
* Try resetting the headphones by pressing the Volume Up (+) and Volume Down (-) buttons simultaneously for 10 seconds.

Headphones won’t pair with my device:
* Make sure Bluetooth is enabled on your device.
* Disable Bluetooth on other nearby devices that may be interfering.
* Reset the headphones as described above.

No sound coming from headphones:
* Check that the volume is not set too low.
* Ensure the headphones are properly connected to your device via Bluetooth.
* Try restarting the headphones and your device.

Sound is distorted or muffled:
* Adjust the volume to a lower level.
* Move closer to the Bluetooth source to improve signal strength.
* Check for any obstructions or interference between the headphones and the Bluetooth source.

Battery won’t charge:
* Ensure you are using the correct charging cable.
* Try a different USB power source.
* Reset the headphones as described above.

Download Brother MW-145BT Driver

Ensure your device is fully compatible with the latest drivers for the Brother MW-145BT. Downloading and installing the correct driver software is essential for optimal functionality and performance.

Download Driver