Brother MW-260 – Driver Download, Setup and User Guide

Advertisement

Comprehensive Guide to Setting Up the Brother MW-260 Mobile Printer

Step 1: Unpack and Connect

  • Unpack the Brother MW-260 printer from the box.
  • Remove all packaging materials and install the included ink cartridges.
  • Connect the power adapter to the printer and an electrical outlet.

Step 2: Charge the Battery

  • Turn on the printer using the power button on the side.
  • Connect the printer to a computer via the included USB cable.
  • The battery will automatically start charging when connected to a computer.
  • Allow the battery to fully charge before using it wirelessly.

Step 3: Install Software and Connect Wireless

For Windows:

  • Insert the included software CD into your computer’s drive.
  • Follow the on-screen prompts to install the software.
  • Once installed, connect the printer wirelessly by following the instructions in the software setup wizard.

For Mac:

  • Access the Brother website and download the latest drivers for the MW-260.
  • Install the drivers and connect the printer wirelessly by selecting it from the network preferences.

Step 4: Paper Loading

  • Open the paper tray by pulling it towards you.
  • Insert the paper into the tray with the print side facing down.
  • Adjust the paper guides to fit the paper size.
  • Close the paper tray and ensure it is securely closed.

Troubleshooting Common Issues

Printer Not Connecting Wirelessly

  • Verify that the printer and computer are on the same wireless network.
  • Check if the printer is set to the correct wireless settings (e.g., password, SSID).
  • Reset the printer’s network settings by holding down the Wi-Fi button for 5 seconds.
  • Reinstall the printer software and try connecting again.

Print Quality Issues

  • Check the ink cartridge levels and replace if necessary.
  • Clean the printhead using the built-in cleaning utility in the printer settings.
  • Try using different paper types and ensure they meet the printer’s specifications.

Battery Not Charging

  • Ensure that the power adapter is securely connected to the printer and the wall outlet.
  • Check the cable for any damage.
  • Allow sufficient time for the battery to charge (usually several hours).
  • If the battery still does not charge, contact Brother support.

Paper Jams

  • Turn off the printer and open the paper tray.
  • Carefully remove any jammed paper by pulling it straight out.
  • Ensure that the paper is loaded correctly and the paper guides are adjusted properly.
  • Close the paper tray and turn on the printer.

Other Issues

  • Printer not responding: Unplug the printer, wait 30 seconds, then plug it back in.
  • Error messages: Refer to the printer’s user manual or contact Brother support for specific error codes.
  • Unexpected shutdown: Check the battery level and ensure it is not depleted.

Download Brother MW-260 Driver

Ensure your device is fully compatible with the latest drivers for the Brother MW-260. Downloading and installing the correct driver software is essential for optimal functionality and performance.

Download Driver