Canon BJC-250 – Driver Download, Setup and User Guide

Advertisement

Setting Up the Canon BJC-250

Introduction

The Canon BJC-250 is an inkjet printer known for its affordability and user-friendliness. To ensure optimal performance, it is crucial to set up the printer correctly. This guide will provide a detailed walkthrough of the setup process, addressing common troubleshooting issues along the way.

Materials You’ll Need

  • Canon BJC-250 printer
  • Power cable
  • USB cable
  • Ink cartridges (BK and Tri-Color)
  • Paper
  • Printer driver CD or downloaded software

Step-by-Step Setup

1. Connect Power and Install Cartridges:

  • Connect the power cable to the printer and a power outlet.
  • Open the ink cartridge covers on the printer.
  • Insert the black (BK) cartridge into the left slot and the tri-color cartridge into the right slot.
  • Align the cartridges with the arrows and push down firmly until they click into place.

2. Install the Printer Driver:

  • Insert the printer driver CD or download the software from Canon’s website.
  • Follow the on-screen instructions to install the driver.
  • Once installed, select “Canon BJC-250” as your printer.

3. Connect to a Computer:

  • Connect one end of the USB cable to the USB port on the back of the printer.
  • Connect the other end to an available USB port on your computer.

4. Load Paper:

  • Open the paper tray by pulling it down.
  • Adjust the paper guides to match the size of the paper.
  • Load paper into the tray with the printable side facing up.

5. Print a Test Page:

  • From your computer, go to “Control Panel” > “Printers.”
  • Right-click on the “Canon BJC-250” printer and select “Print Test Page.”
  • If the test page prints successfully, your printer is set up correctly.

Troubleshooting Common Issues

1. Printer Not Recognized:

  • Make sure the USB cable is securely connected at both ends.
  • Restart your computer and the printer.
  • Uninstall and reinstall the printer driver.

2. Printing Blank Pages:

  • Check if the ink cartridges are empty or not properly installed.
  • Clean the print nozzles using the built-in cleaning utility in the printer driver.
  • Ensure that the paper type selected in the printer driver matches the paper loaded in the tray.

3. Paper Jams:

  • Open the paper tray and remove any jammed paper gently.
  • Close the paper tray and try printing again.
  • Check for any debris or obstructions inside the printer that may cause paper jams.

4. Print Quality Poor:

  • Replace the ink cartridges with new ones.
  • Clean the print nozzles using the cleaning utility.
  • Check the paper type and quality. Heavier or coated paper may produce better results.

5. Error Messages:

  • Consult the printer manual for specific error messages and their solutions.
  • Restart the printer and check if the error persists.
  • Contact Canon customer support for further assistance.

Additional Tips

  • Always use genuine Canon ink cartridges to ensure optimal performance and warranty coverage.
  • Clean the print nozzles regularly to prevent clogging.
  • Update the printer firmware periodically to improve functionality and address any known issues.
  • Handle the printer with care to avoid damaging the delicate components.

By following these steps and troubleshooting tips, you can successfully set up your Canon BJC-250 printer and enjoy high-quality printing.

Download Canon BJC-250 Driver

Ensure your device is fully compatible with the latest drivers for the Canon BJC-250. Downloading and installing the correct driver software is essential for optimal functionality and performance.

Download Driver