Canon E600 series – Driver Download, Setup and User Guide

Advertisement

Setting Up the Canon E600 Series

Step 1: Unpack the Printer

Carefully remove the printer from the box and place it on a flat, stable surface. Discard the packing materials.

Step 2: Install the Ink Cartridges

Open the printer top cover to access the ink cartridge slots. Remove the protective caps from the ink cartridges and insert them firmly into the corresponding slots. Make sure they click into place.

Step 3: Connect the Power Cable

Locate the power port at the back of the printer and connect the supplied power cable securely. Plug the other end of the cable into a power outlet.

Step 4: Connect via USB or Wi-Fi

USB Connection:

Connect one end of the provided USB cable to the printer and the other end to a USB port on your computer.

Wi-Fi Connection:

  1. Press the “Wi-Fi” button on the printer. The Wi-Fi indicator will flash.
  2. On your computer or mobile device, locate the printer’s Wi-Fi network and select it.
  3. Enter the password displayed on the printer LCD screen.

Step 5: Install the Software

Insert the software CD into your computer and follow the on-screen instructions to install the printer driver and other software.

Step 6: Load Paper

Open the paper tray and adjust the paper guides to fit the size of paper you are using. Load the paper into the tray and close it.

Step 7: Print a Test Page

From your computer, select the printer from the “Print” dialog box and click “Print Page”. The printer should print out a test page to verify its functionality.

Troubleshooting Common Issues

Printer Not Printing

  • Check the connection: Ensure that the printer is connected properly via USB or Wi-Fi.
  • Clean the print heads: Run the “Cleaning” utility from the printer settings to remove any clogs.
  • Replace ink cartridges: If the ink levels are low, replace the empty cartridges.

Printer Jams

  • Remove the paper jam: Gently pull out any jammed paper from the rear or front of the printer.
  • Check the paper tray: Make sure the paper is loaded correctly and the guides are adjusted properly.
  • Restart the printer: Turn off the printer, wait a few minutes, and then turn it back on.

Printer Not Recognized

  • Check the driver: Make sure that the correct printer driver is installed on your computer.
  • Restart the computer and printer: Turn off both your computer and printer, wait a few minutes, and then turn them back on.
  • Check the USB cable: If using a USB connection, ensure that the cable is properly connected and not damaged.

Printer Offline

  • Check the status: Use the printer software or the printer’s LCD screen to check if the printer is in “Offline” mode.
  • Restart the printer: Turn off the printer and then turn it back on.
  • Restart your computer: In some cases, restarting the computer can resolve the “Offline” issue.

Paper Misalignment

  • Adjust the paper guides: Make sure that the paper guides in the paper tray are adjusted properly to fit the size of paper you are using.
  • Reset the printer: Turn off the printer, wait a few minutes, and then turn it back on to reset any misaligned settings.

Download Canon E600 series Driver

Ensure your device is fully compatible with the latest drivers for the Canon E600 series. Downloading and installing the correct driver software is essential for optimal functionality and performance.

Download Driver