Canon iP2700 series – Driver Download, Setup and User Guide

Advertisement

Detailed Guide to Setting Up the Canon iP2700 Series Printer

System Requirements

  • Windows 7, 8.1, 10, 11
  • macOS 10.15 or later
  • 1 GB RAM (2 GB recommended)
  • 500 MB of free hard disk space

Step-by-Step Setup

1. Unpack and Connect

  • Unbox the printer and remove all packaging materials.
  • Connect the printer to a power outlet using the included power cord.
  • Open the front cover and remove any tape or protective sheet.

2. Install Ink Cartridges

  • Open the ink cartridge cover.
  • Remove the orange protective covers from the ink cartridges.
  • Align the cartridges with the corresponding colored slots.
  • Push down on the cartridges until they click into place.

3. Load Paper

  • Open the rear paper tray.
  • Adjust the paper guides to fit the size of paper you’re using.
  • Load the paper into the tray and make sure it’s flat.

4. Connect to Computer

Wi-Fi (Recommended):

  • Turn on the printer.
  • Press and hold the Wi-Fi button on the printer until the blue light starts flashing.
  • On your computer, go to Wi-Fi settings and connect to the network “CanoniPBXXXXXX”.
  • Open a web browser and navigate to http://ij.start.cannon.
  • Follow the on-screen instructions to complete the setup.

USB:

  • Connect a USB cable from your computer to the USB port on the printer.
  • The printer should be automatically detected by your computer.

5. Install Printer Driver

  • Download the appropriate printer driver from the Canon website.
  • Run the installer and follow the prompts to install the driver.

Troubleshooting Common Issues

Printer Not Printing

  • Check if the printer is turned on and connected to power.
  • Make sure the ink cartridges are properly installed.
  • Check if there’s any paper jammed in the printer.
  • Restart the printer and try again.

Printing Error Messages

  • “Ink cartridge not detected”: Remove and reinstall the cartridge. If the issue persists, replace the cartridge.
  • “Paper jam”: Open the front and rear covers and remove any jammed paper.
  • “Printer not connected”: Check the Wi-Fi or USB connection and restart the printer.

Poor Print Quality

  • Check the ink levels in the cartridges.
  • Clean the print head using the printer’s maintenance utility.
  • Use high-quality paper to improve print results.

Wi-Fi Connection Problems

  • Make sure your router is turned on and within range.
  • Check if the printer is connected to the correct Wi-Fi network.
  • Restart the printer and your router.
  • Reset the printer’s Wi-Fi settings using the printer’s menu.

Conclusion

By following these steps, you should be able to successfully set up your Canon iP2700 series printer. If you encounter any issues, refer to the troubleshooting section or contact Canon support for assistance.

Download Canon iP2700 series Driver

Ensure your device is fully compatible with the latest drivers for the Canon iP2700 series. Downloading and installing the correct driver software is essential for optimal functionality and performance.

Download Driver