Canon LBP6650/3470 – Driver Download, Setup and User Guide

Advertisement

Detailed Guide to Setting Up Canon LBP6650/3470 Printers

Unboxing and Preparation

  1. Open the printer box and remove all components.
  2. Remove the protective packaging from the toner cartridge.
  3. Insert the cartridge firmly into the printer until it clicks into place.
  4. Lift the front cover to reveal the paper tray.
  5. Slide open the tray and load paper according to the guidelines printed on the tray.
  6. Close the front cover and the paper tray.

Computer Connection

USB Connection:

  1. Connect a USB cable to the rear of the printer and to an available USB port on your computer.
  2. Install the printer driver from the included CD or download it from Canon’s website.

Network Connection (Wired/Wireless):

  1. Connect the printer to your network using an Ethernet cable (wired) or Wi-Fi (wireless). Refer to the printer’s manual for specific instructions.
  2. On your computer, open the printer setup wizard or device manager to add the printer.

Software Installation

  1. Insert the driver CD into your computer’s optical drive.
  2. Follow the on-screen instructions to install the printer driver.
  3. Select the appropriate printer connection method (USB or Network).
  4. Configure your printer settings as needed.

Troubleshooting Common Issues

No Power:

  • Check if the printer is properly plugged into an outlet.
  • Ensure the power switch is turned on.
  • Try a different power cord.

No Paper:

  • Verify that there is paper loaded in the tray.
  • Load paper correctly according to the printed guidelines.
  • Check for paper jams and remove them carefully.

Print Quality Issues:

  • Replace the toner cartridge if it is low or depleted.
  • Clean the printer heads using the built-in cleaning utility.
  • Adjust the printer settings for resolution and paper type.

Error Codes:

  • E000: Paper jam. Clear the jam according to the instructions.
  • E001: Toner cartridge not installed. Insert the toner cartridge properly.
  • E002: Toner cartridge empty. Replace the toner cartridge.
  • E003: Toner cartridge not recognized. Reinstall the toner cartridge or contact Canon support.

Network Connection Issues:

  • Ensure the printer is connected to the same network as your computer.
  • Check if the printer IP address is correct.
  • Disable firewall or antivirus software that may be blocking the connection.

Additional Tips

  • For optimal performance, use genuine Canon toner cartridges.
  • Clean the printer regularly to prevent paper jams and other issues.
  • Update the printer driver and firmware as recommended by Canon.
  • If you encounter persistent issues, contact Canon customer support for assistance.

Download Canon LBP6650/3470 Driver

Ensure your device is fully compatible with the latest drivers for the Canon LBP6650/3470. Downloading and installing the correct driver software is essential for optimal functionality and performance.

Download Driver