Canon MAXIFY MB5390 – Driver Download, Setup and User Guide

Advertisement

Setting Up the Canon MAXIFY MB5390: A Comprehensive Guide

Unboxing and Setup

  1. Remove the printer from the box and remove all protective packaging.
  2. Connect the power cable to the printer and plug it into an electrical outlet.
  3. Lift the scanner unit and remove the orange protective tape.
  4. Install the ink cartridges according to the color-coded slots.
  5. Fill the ink tank with the provided ink bottles until the ink level reaches the indicated fill line. Note: Do not overfill the ink tank.

Paper Loading

  1. Open the paper tray cover.
  2. Insert the paper into the tray with the printing side facing down.
  3. Adjust the paper guides to fit the size of the paper you are loading.
  4. Close the paper tray cover.

Wireless Network Connection

  1. Press the Wireless button on the printer.
  2. The Wi-Fi lamp will flash.
  3. On your computer or mobile device, open the Wi-Fi settings and select the Canon MAXIFY MB5390 network.
  4. Enter the password “5390” (case-sensitive) when prompted.
  5. Once connected, the Wi-Fi lamp will turn solid blue.

Software Installation

  1. Insert the setup CD into your computer’s CD-ROM drive.
  2. If the setup does not start automatically, navigate to the CD-ROM drive and launch the “setup.exe” file.
  3. Follow the on-screen instructions to install the printer software.
  4. Once the installation is complete, connect the printer to your computer using the USB cable provided.

Troubleshooting Common Issues

1. Printer Not Printing:
* Check if the printer is powered on and connected to a power source.
* Ensure that the paper is loaded properly and the paper guides are adjusted correctly.
* Inspect the ink cartridges for any empty or damaged cartridges.
* Restart the printer by unplugging it and plugging it back in.

2. Paper Jams:
* Gently remove the jammed paper from the printer. Avoid pulling too hard, as this may damage the printer.
* Check if the paper is creased or folded.
* Adjust the paper guide settings to prevent further paper jams.

3. Wireless Connection Issues:
* Verify that the printer is connected to the same Wi-Fi network as your computer or mobile device.
* Reset the printer’s Wi-Fi connection by pressing and holding the Wireless and Resume buttons simultaneously for 5 seconds.
* Ensure that the computer or mobile device is within range of the printer’s Wi-Fi network.

4. Ink System Errors:
* If the ink system light on the printer is flashing, it indicates a low ink level. Replace the empty ink cartridges with new ones.
* If the ink system light is blinking alternating colors, it suggests a problem with the ink tank. Contact Canon support for assistance.

5. Software Installation Problems:
* Ensure that you are running a compatible operating system.
* Check if you have sufficient disk space for the software installation.
* Uninstall any previous printer software before installing the Canon MAXIFY MB5390 software.

Download Canon MAXIFY MB5390 Driver

Ensure your device is fully compatible with the latest drivers for the Canon MAXIFY MB5390. Downloading and installing the correct driver software is essential for optimal functionality and performance.

Download Driver