Canon MG3500 series – Driver Download, Setup and User Guide

Advertisement

Detailed Guide to Setting Up the Canon MG3500 Series

Unboxing and Setup

  1. Unbox the printer: Remove the printer, ink cartridges, power cord, and setup CD from the box.
  2. Install the ink cartridges: Remove the orange protective plugs from the ink cartridges and insert them into the designated slots.
  3. Connect the power cord: Plug one end of the power cord into the printer and the other end into a power outlet.
  4. Insert paper: Lift the scanner lid and insert a stack of plain paper into the paper tray.

Software Installation

  1. Insert the setup CD: Insert the included setup CD into your computer’s CD-ROM drive.
  2. Follow the on-screen instructions: The setup wizard will guide you through the installation process.
  3. Choose a connection type: Select whether you want to connect the printer via Wi-Fi or USB.
  4. Complete the setup: Once the installation is complete, click “Exit” to close the setup wizard.

Wi-Fi Connection

  1. Turn on Wi-Fi: Press the “Wi-Fi” button on the printer’s control panel to enable Wi-Fi.
  2. Connect to a network: Select the network name and enter the password using the arrow keys and OK button.
  3. Confirm the connection: Test the connection by printing a test page.

USB Connection

  1. Connect the USB cable: Connect one end of the USB cable to the printer and the other end to an available USB port on your computer.
  2. Install the driver: The computer will automatically detect the printer and install the necessary drivers.
  3. Confirm the connection: Open the Control Panel on your computer and navigate to “Printers.” Verify that the Canon MG3500 series printer is listed.

Troubleshooting Common Issues

1. Printer not found during setup:

  • Make sure both the printer and computer are powered on.
  • Disconnect and reconnect the USB cable or check the Wi-Fi connection.
  • Restart both the printer and computer.

2. Printing issues:

  • Check the ink levels.
  • Remove any jammed paper from the printer.
  • Clean the print heads.
  • Update the printer driver.

3. Scanner not working:

  • Make sure the scanner lid is properly closed.
  • Clean the scanner glass.
  • Disable any antivirus software that may be blocking the scanner.

4. Wi-Fi connectivity problems:

  • Power cycle the printer by unplugging it and plugging it back in.
  • Reset the printer’s Wi-Fi settings.
  • Check if your router is functioning properly.

5. Paper jams:

  • Open the printer’s cover and gently remove the jammed paper.
  • Avoid overloading the paper tray.
  • Use high-quality paper that is suitable for the printer.

6. Ink problems:

  • If the ink cartridges are damaged or low on ink, replace them.
  • Check if the ink cartridge chips are properly installed.
  • Clean the ink cartridge contacts.

7. Error messages:

  • Refer to the printer’s user manual for specific error codes and their solutions.
  • In most cases, restarting the printer or clearing the print queue will resolve the issue.

Download Canon MG3500 series Driver

Ensure your device is fully compatible with the latest drivers for the Canon MG3500 series. Downloading and installing the correct driver software is essential for optimal functionality and performance.

Download Driver