Canon PIXMA E484 – Driver Download, Setup and User Guide

Advertisement

Setting Up Your Canon PIXMA E484 Printer: A Comprehensive Guide

Materials You’ll Need

  • Canon PIXMA E484 printer
  • Power cord
  • USB cable (optional, for wired connection)
  • Wi-Fi network name and password (for wireless connection)
  • Printer drivers (download from Canon website)

Step-by-Step Setup

1. Unbox and Install:

  • Unpack the printer and remove all protective materials.
  • Insert the power cord into the printer and a nearby outlet.

2. Connect to Network (Optional):

  • For wired connection: Connect the USB cable to your computer and the other end to the “USB” port on the printer.
  • For wireless connection:
    • Press the “Wi-Fi” button on the printer to activate Wi-Fi setup mode.
    • On your computer or mobile device, connect to the printer’s Wi-Fi network (SSID).
    • Enter the Wi-Fi password when prompted.
    • Once connected, return to your computer or device and proceed with the software installation.

3. Install Software and Drivers:

  • Visit Canon’s website to download the latest printer drivers for your operating system.
  • Run the downloaded setup file and follow the on-screen instructions to install the drivers.
  • Connect the printer to your computer using the USB cable or Wi-Fi network (if not already done).

4. Load Paper and Cartridges:

  • Open the front cover of the printer.
  • Adjust the paper guides to match the paper size you’re using.
  • Load the paper into the cassette.
  • Install the black and color ink cartridges by lifting the cartridge flap and aligning the cartridges with the corresponding slots.
  • Close the front cover and the cartridge flap.

5. Alignment and Nozzle Check:

  • The printer will automatically perform an alignment and nozzle check.
  • Remove the alignment page and check if the lines are straight and the colors are vivid.
  • If necessary, follow the on-screen instructions to adjust the alignment.

6. Printing:

  • Open the document or image you want to print.
  • Go to “File” > “Print”.
  • Select your Canon PIXMA E484 printer from the list of available devices.
  • Adjust print settings as desired, such as paper type, size, and quality.
  • Click “Print” to start the printing process.

Troubleshooting Common Issues

Printer Not Connecting to Wi-Fi:

  • Ensure the printer is within range of your Wi-Fi router.
  • Check if the Wi-Fi password entered is correct.
  • Reset the printer’s Wi-Fi settings and try connecting again.

Blank or Faded Prints:

  • Check the ink levels and replace empty cartridges.
  • Clean the print nozzles using the maintenance options in the printer’s software.
  • Ensure you are using the correct paper type for the print job.

Paper Jams:

  • Gently pull the paper out in the direction it came from.
  • Check for any torn or wrinkled paper and remove it.
  • Reset the printer by unplugging it and plugging it back in.

Error Messages:

  • Refer to the printer’s user manual for specific error code explanations and troubleshooting steps.
  • Contact Canon support if the error persists.

Additional Tips:

  • Use high-quality Canon ink cartridges for optimal print quality.
  • Keep the printer clean by wiping down its exterior and cleaning the print nozzles regularly.
  • If you experience any issues, refer to the printer’s documentation or contact Canon for support.

Download Canon PIXMA E484 Driver

Ensure your device is fully compatible with the latest drivers for the Canon PIXMA E484. Downloading and installing the correct driver software is essential for optimal functionality and performance.

Download Driver