Canon PIXMA iP2820 – Driver Download, Setup and User Guide
Advertisement
Setting Up the Canon PIXMA iP2820
Materials:
- Canon PIXMA iP2820 printer
- Ink cartridges
- Power cord
- USB data cable (optional, only for wired connection)
- Wi-Fi network name and password (for wireless connection)
Step 1: Unpack and Install
- Open the printer box and remove the printer, ink cartridges, and any other included materials.
- Remove the orange protective caps from the ink cartridges.
- Insert the ink cartridges into the corresponding slots in the printer until they click into place.
- Connect the power cord to the printer and a power outlet.
Step 2: Connect to Computer
- Wired Connection: Insert the USB cable into the USB port on the back of the printer and the other end into an available USB port on your computer.
- Wireless Connection:
- Press the “Wi-Fi” button on the printer.
- The “Wi-Fi Lamp” will start flashing.
- On your computer, navigate to your Wi-Fi settings and select the “Canon_XXXXXX” network (where “XXXXXX” represents the last six digits of the printer’s serial number).
- Enter the Wi-Fi password when prompted.
- Once connected, open your printer software and select “Wireless Setup.”
Step 3: Install Software
- Insert the included software CD into your computer’s CD-ROM drive.
- Follow the on-screen instructions to install the printer drivers and software.
- After installing the software, select “Add a Printer” from your computer’s settings and follow the prompts to complete the printer setup.
Troubleshooting Common Issues
Printer Not Printing:
- Check if the printer is powered on and connected to power.
- Verify that the ink cartridges are properly installed.
- Unplug the power cord and USB cable, wait a few minutes, and then reconnect them.
- Restart your computer.
Connection Issues:
- Wired Connection: Ensure that the USB cable is securely connected to both the printer and computer.
- Wireless Connection: Make sure that the printer is within range of your Wi-Fi router. Reset the printer’s Wi-Fi settings by pressing and holding the “Stop” button for 5 seconds.
Ink Smudges:
- Check if the paper is loaded correctly. Remove the paper and reload it properly.
- Use high-quality paper that is compatible with the printer.
- Clean the print heads by following the instructions in the printer’s user manual.
Paper Jams:
- Open the printer and remove any jammed paper carefully.
- Close the printer and try printing again.
- If the paper jam persists, consult the printer’s user manual for further troubleshooting instructions.
Other Issues:
- No Ink: Replace the empty ink cartridges with new ones.
- Print Quality Issues: Clean or replace the print heads.
- Error Codes: Refer to the printer’s user manual or contact Canon support for assistance.
Download Canon PIXMA iP2820 Driver
Ensure your device is fully compatible with the latest drivers for the Canon PIXMA iP2820. Downloading and installing the correct driver software is essential for optimal functionality and performance.