Canon PIXMA iP8720 – Driver Download, Setup and User Guide

Advertisement

Setting Up Your Canon PIXMA iP8720: A Comprehensive Guide

Introduction

The Canon PIXMA iP8720 is a high-quality printer designed for home or office use. With its advanced features and user-friendly design, setting up the iP8720 is a straightforward process. This guide will provide a step-by-step breakdown of the setup procedure, along with troubleshooting tips for common issues.

Step 1: Unbox and Install the Printer

  1. Unpack the printer and remove all protective materials.
  2. Place the printer on a flat, stable surface.
  3. Open the top cover and remove the protective orange tape from the print head. Do not touch the print head nozzles.

Step 2: Install the Ink Cartridges

  1. Open the front cover of the printer.
  2. Remove the orange protective cap from the new ink cartridge.
  3. Insert the cartridge into the corresponding color slot.
  4. Push down on the cartridge until it clicks into place.
  5. Repeat for all eight ink cartridges.

Step 3: Load Paper

  1. Pull out the paper tray and slide the paper width guides to the desired size.
  2. Insert your paper into the tray with the printable side up.
  3. Push the paper tray back into the printer.

Step 4: Connect the Printer

Wired Connection:

  1. Connect one end of the USB cable to your computer and the other end to the USB port on the back of the printer.

Wireless Connection:

  1. Turn on the printer.
  2. Press the “Wi-Fi Setup” button on the printer control panel.
  3. Select your Wi-Fi network and enter your password.
  4. Once the printer is connected, it will assign itself an IP address.

Step 5: Install the Software and Drivers

  1. Insert the setup CD into your computer.
  2. Follow the on-screen instructions to install the software and drivers.
  3. Select the appropriate printer model from the list and choose the “Wireless” or “USB” option according to your connection method.

Troubleshooting Common Issues

Printer Not Printing:

  • Check if the printer is turned on and connected to your computer or network.
  • Ensure that there is sufficient ink in all cartridges.
  • Inspect the print head nozzles for any clogs.
  • Clean the print head if necessary.

Paper Jams:

  • Remove any jammed paper carefully from the paper path.
  • Avoid pulling the paper too forcefully to prevent tearing.
  • Check if the paper is loaded correctly and that the paper guides are adjusted properly.

Printing Alignment Issues:

  • Print an alignment page from the printer’s control panel.
  • Follow the instructions on the alignment page to adjust the print head alignment.

Error Messages:

  • Refer to the user manual or Canon’s support website for error message descriptions and troubleshooting steps.
  • Ensure that the printer is receiving power and that all cables are securely connected.

Conclusion:

Setting up the Canon PIXMA iP8720 is a simple process that can be completed in a few easy steps. By following the instructions outlined in this guide, you can get your printer up and running quickly. If you encounter any issues during setup or operation, refer to the troubleshooting tips provided or seek assistance from Canon’s support team.

Download Canon PIXMA iP8720 Driver

Ensure your device is fully compatible with the latest drivers for the Canon PIXMA iP8720. Downloading and installing the correct driver software is essential for optimal functionality and performance.

Download Driver