Canon PIXMA iX6520 – Driver Download, Setup and User Guide

Advertisement

Detailed Guide to Setting Up the Canon PIXMA iX6520

Introduction

The Canon PIXMA iX6520 is a high-quality inkjet printer designed for home and office use. With its advanced features, it offers exceptional print quality, convenience, and versatility. This guide will provide you with a step-by-step walkthrough of the setup process, including troubleshooting common issues.

Step 1: Unbox and Prepare

  • Open the printer box and carefully remove all components.
  • Uncover the printer and remove the protective film or tape.
  • Open the paper tray and remove any paper or packaging material.

Step 2: Install Ink Cartridges

  • Open the front cartridge cover.
  • Remove the protective caps from the ink cartridges.
  • Insert the cartridges into the corresponding slots until they click into place.
  • Close the cartridge cover.

Step 3: Connect to Power

  • Plug the power cord into the printer and a power outlet.
  • Turn on the printer by pressing the power button.

Step 4: Install Software

  • Insert the included CD-ROM or USB drive into your computer.
  • Follow the on-screen prompts to install the printer software.
  • When prompted, connect the printer to your computer using the included USB cable.

Step 5: Configure Network (Optional)

  • If you want to connect the printer to a wireless network:
    • From the printer’s control panel, navigate to “Setup” > “Network Settings” > “Wireless LAN Setup.”
    • Select your network and enter the password.
    • Press “OK” to connect.

Step 6: Load Paper

  • Open the paper tray and adjust the paper guides to match the paper size.
  • Load the paper into the tray with the printable side face up.
  • Close the paper tray.

Step 7: Print a Test Page

  • From the printer’s control panel, navigate to “Setup” > “Maintenance” > “Print Test Page.”
  • Press “OK” to print a test page.
  • Verify that the page is printed correctly.

Troubleshooting Common Issues

Printer won’t turn on:

  • Make sure the power cord is securely plugged into the printer and power outlet.
  • Unplug the printer and wait a few minutes before plugging it back in.

Ink cartridge installation error:

  • Ensure that the ink cartridges are inserted into the correct slots.
  • Remove the cartridges and reinstall them carefully.

Wireless network connection issues:

  • Check if your network is functioning properly.
  • Make sure the printer is within range of your wireless router.
  • Reset the printer’s network settings and try to connect again.

Print quality issues:

  • Clean the print heads using the utility provided in the printer software.
  • Replace any empty or low ink cartridges.
  • Check if the paper type and settings match the print job.

Paper jam:

  • Open the paper tray and remove any jammed paper.
  • Make sure the paper guides are adjusted to the correct paper size.
  • Reload the paper and adjust the guides accordingly.

Conclusion

By following the steps outlined in this guide, you can successfully set up your Canon PIXMA iX6520 printer. Remember to troubleshoot any issues you encounter by consulting the troubleshooting section. With proper care and maintenance, your printer will provide you with years of exceptional printing performance.

Download Canon PIXMA iX6520 Driver

Ensure your device is fully compatible with the latest drivers for the Canon PIXMA iX6520. Downloading and installing the correct driver software is essential for optimal functionality and performance.

Download Driver