Canon PIXMA MG2960 – Driver Download, Setup and User Guide

Advertisement

Detailed Guide to Setting Up the Canon PIXMA MG2960

Unboxing and Setup

  1. Unbox the printer: Remove the printer from its box and discard the packaging.
  2. Install the ink cartridges: Open the front cover of the printer and insert the ink cartridges into the correct slots.
  3. Load paper: Lift the front paper tray and insert plain paper into the tray.
  4. Connect the power cable: Plug the power cable into the back of the printer and into a power outlet.
  5. Power on the printer: Press the power button on the top right corner of the printer.

Software Installation

  1. Download the software: Visit the Canon website and download the MG2960 driver software for your operating system.
  2. Run the installer: Start the installer executable file and follow the on-screen prompts to install the software.
  3. Select the printer: During installation, select your MG2960 printer from the list of available printers.
  4. Connect the printer to your computer: If you want to connect the printer via USB, plug the printer cable into a USB port on your computer. If you want to connect wirelessly, follow the instructions in the next section.

Wireless Connection Setup

  1. Press the Wi-Fi button: On the top of the printer, press and hold the Wi-Fi button until the light starts flashing.
  2. Go to network settings: On your computer or mobile device, go to the Wi-Fi settings.
  3. Select the printer’s SSID: A new network named “CanonMG2960XX” will appear in the list of available Wi-Fi networks. Select it and connect to it.
  4. Enter the printer password: If prompted, enter the printer’s password, which is usually “0000”.
  5. Return to the installer: Go back to the printer software installer and click on “Reconnect.” The printer should now be connected wirelessly.

Troubleshooting Common Issues

Printer not printing:

  • Check if the printer is turned on and connected to a power source.
  • Ensure that ink cartridges are properly installed.
  • Check if there is paper loaded in the paper tray.
  • Restart the printer by unplugging it and plugging it back in.

Poor print quality:

  • Clean the print head using the utility provided in the printer software.
  • Try using different paper or a higher-quality paper.
  • Adjust the print settings to improve print quality.

Wi-Fi connection issues:

  • Ensure that your computer or mobile device is connected to the same Wi-Fi network as the printer.
  • Reset the printer’s Wi-Fi settings by holding down the Wi-Fi button for 5 seconds.
  • Check if the printer’s Wi-Fi password is correct.

Scanner not working:

  • Make sure that the scanner lid is properly closed.
  • Check if the scanner driver is installed on your computer.
  • Verify that the scanner is selected as the input device in the scanning software.

Other issues:

  • If you encounter any other issues, consult the printer’s user manual or contact Canon support for assistance.

Download Canon PIXMA MG2960 Driver

Ensure your device is fully compatible with the latest drivers for the Canon PIXMA MG2960. Downloading and installing the correct driver software is essential for optimal functionality and performance.

Download Driver