Canon PIXMA MG5320 – Driver Download, Setup and User Guide

Advertisement

Comprehensive Guide to Setting Up the Canon PIXMA MG5320

Introduction

The Canon PIXMA MG5320 is a versatile all-in-one printer that offers high-quality printing, scanning, and copying. Setting up this device is relatively straightforward, but this guide will provide a detailed step-by-step walkthrough to ensure a smooth installation.

Step 1: Unboxing and Assembly

  • Unbox the printer and remove all protective materials.
  • Install the ink cartridges into the designated slots. Ensure they snap into place firmly.
  • Insert the paper into the rear input tray. Adjust the paper guides to fit the paper size.

Step 2: Connecting to a Power Source

  • Connect the power cord to the printer and a power outlet.
  • Turn on the printer using the power button.

Step 3: Wireless Setup

Option 1: WPS Push Button

  • Enable WPS on your wireless router.
  • Press and hold the WPS button on the printer for 2 seconds.
  • The printer will automatically detect and connect to the wireless network.

Option 2: Manual Setup

  • Open the WiFi settings on your computer or mobile device.
  • Select the Canon MG5320 network from the list of available networks.
  • Enter the password or follow the on-screen instructions to complete the connection.

Step 4: Software Installation

  • Insert the installation CD into your computer.
  • Follow the on-screen prompts to install the printer software.
  • Choose the Custom or Advanced installation option to manually configure the wireless settings.

Step 5: Driver Installation

  • The printer software will automatically install the necessary drivers.
  • If prompted, select the Canon MG5320 printer from the list of available devices.

Troubleshooting Common Issues

Problem: Printer is not connected to WiFi.

  • Verify that the WPS button is pressed firmly and held for 2 seconds.
  • Ensure that the wireless router is WPS-enabled.
  • Check if the printer is placed within the range of the wireless router.

Problem: Print quality is poor.

  • Ensure that the correct paper size and type are selected in the printer settings.
  • Clean the printer heads by following the instructions in the printer manual.
  • Replace the ink cartridges if they are low or empty.

Problem: Printer is not recognized by computer.

  • Double-check that the printer is turned on and connected to a power source.
  • Verify that the USB cable (if used) is securely connected to both the printer and the computer.
  • Reinstall the printer software and drivers.

Problem: Paper jams.

  • Carefully remove the jammed paper from the paper path.
  • Check for any torn pieces of paper and remove them.
  • Adjust the paper guides in the input tray to ensure a smooth paper feed.

Conclusion

Setting up the Canon PIXMA MG5320 is a straightforward process that can be completed in a few simple steps. By following the instructions outlined in this guide, you can ensure a hassle-free installation and enjoy the full functionality of your printer. If you encounter any issues, refer to the troubleshooting section for potential solutions.

Download Canon PIXMA MG5320 Driver

Ensure your device is fully compatible with the latest drivers for the Canon PIXMA MG5320. Downloading and installing the correct driver software is essential for optimal functionality and performance.

Download Driver