Canon PIXMA MG5460 – Driver Download, Setup and User Guide

Advertisement

Detailed Guide to Setting Up the Canon PIXMA MG5460

Unboxing and Preparation

  1. Remove the printer from the packaging and remove all protective materials.
  2. Place the printer on a flat, stable surface with at least 10 inches of clearance on all sides.
  3. Open the rear cover and remove the orange protective tape from the ink cartridges.

Ink Cartridge Installation

  1. Open the ink cartridge cover.
  2. Insert each ink cartridge into its designated slot (black, cyan, magenta, yellow).
  3. Push down firmly on each cartridge until it clicks into place.
  4. Close the ink cartridge cover.

Paper Tray Configuration

  1. Open the paper output tray.
  2. Pull the paper support out to extend the tray.
  3. Load plain paper or photo paper with the printable side facing up.
  4. Adjust the paper guides to fit the paper size and type.
  5. Close the paper output tray.

Power Connection and Wi-Fi Setup

  1. Connect the power cord to the printer and a power outlet.
  2. Turn on the printer using the power button.
  3. Press the “Wi-Fi” button on the printer.
  4. Select your Wi-Fi network from the list and enter the password.
  5. Press the “OK” button and wait for the printer to connect.

Software Installation

  1. Insert the Canon software CD into your computer’s optical drive.
  2. Follow the on-screen instructions to install the software.
  3. Select the “Full Setup” or “Custom Setup” option.
  4. Choose your preferred connection method (USB or Wi-Fi).
  5. Complete the installation and click “Finish.”

Common Issues and Troubleshooting

Printer Not Responding

  • Ensure that the printer is connected to a power outlet and turned on.
  • Check the USB cable or Wi-Fi connection and ensure they are secure.
  • Restart the printer by pressing and holding the power button for 10 seconds.

Paper Jams

  • Open the rear cover of the printer and remove any jammed paper.
  • Check the paper tray for any obstructions or foreign objects.
  • Reload the paper and make sure it is aligned properly.

Print Quality Issues

  • Clean the print head by running the “Print Head Cleaning” utility in the printer settings.
  • Check the ink levels and replace any empty cartridges.
  • Adjust the print quality settings in the software (e.g., resolution, color mode).

Wireless Connection Problems

  • Make sure your Wi-Fi network is active and stable.
  • Check the Wi-Fi password and ensure it is correct.
  • Try resetting the Wi-Fi settings on the printer and re-connecting.
  • Contact Canon technical support if the issue persists.

Error Messages

  • 001: General paper feed error. Check the paper tray and ensure it is properly loaded.
  • 002: Paper jam. Follow the troubleshooting steps for paper jams.
  • 010: Ink cartridge error. Check the ink cartridge status and replace any empty cartridges.
  • 100: Print head error. Clean the print head or contact Canon support if the issue persists.

Download Canon PIXMA MG5460 Driver

Ensure your device is fully compatible with the latest drivers for the Canon PIXMA MG5460. Downloading and installing the correct driver software is essential for optimal functionality and performance.

Download Driver