Canon PIXMA MG5790 – Driver Download, Setup and User Guide

Advertisement

Canon PIXMA MG5790 Setup Guide

Step 1: Unboxing and Preparation

  • Remove all packaging materials from the printer and accessories.
  • Place the printer on a flat and stable surface.
  • Remove the protective tape from the print head and ink cartridges.

Step 2: Installing the Ink Cartridges

  • Open the printer cover.
  • Remove the empty ink cartridges if any.
  • Insert the new ink cartridges into the corresponding slots.
  • Push down on the cartridges to lock them in place.
  • Close the printer cover.

Step 3: Setting Up the Wireless Network

Using WPS (Wi-Fi Protected Setup):

  • Press and hold the “Wi-Fi” button on the printer for 3 seconds.
  • Press and hold the WPS button on your router.
  • Wait for the printer to connect to the network.

Using Manual Wi-Fi Setup:

  • Connect your computer or mobile device to the printer using the USB cable provided.
  • Open the Canon IJ Setup Tool and select “Wireless LAN Setup.”
  • Follow the on-screen instructions to connect the printer to your network.

Step 4: Installing the Printer Software

  • Insert the Canon setup disc into your computer.
  • If the disc does not start automatically, open “My Computer” and run the “Setup.exe” file.
  • Follow the on-screen instructions to install the printer software and drivers.

Step 5: Loading Paper

  • Open the paper tray.
  • Adjust the paper guides to match the paper size you are using.
  • Load plain paper into the tray.
  • Push the paper tray back into the printer.

Troubleshooting Common Issues

Printer Not Printing:

  • Check that the printer is turned on and properly connected to your device.
  • Make sure the correct paper size and type are loaded.
  • Clean the print head using the maintenance options in the printer software.
  • Replace the ink cartridges if necessary.

Printer Not Connecting to Wi-Fi:

  • Check that your router is turned on and broadcasting an active Wi-Fi signal.
  • Reset the printer by pressing and holding the “Stop” button for 10 seconds.
  • Ensure that the printer is within range of your router.
  • Try setting up the Wi-Fi connection manually using the printer software.

Poor Print Quality:

  • Clean the print head using the maintenance options in the printer software.
  • Replace the ink cartridges if they are running low or defective.
  • Check that the paper type you are using is compatible with the printer.
  • Adjust the print settings in the printer software for the desired quality level.

Error Messages:

  • Cartridge Not Recognized: Reseat the ink cartridge and ensure it is properly installed.
  • Paper Jam: Carefully remove the jammed paper from the printer and restart the printing process.
  • Overheating: Allow the printer to cool down for a few minutes before resuming printing.
  • General Error: Turn the printer off and back on. If the error persists, contact Canon support.

Additional Tips:

  • Keep the printer updated with the latest firmware and software.
  • Use genuine Canon ink cartridges for optimal performance.
  • Clean the printer regularly to prevent paper jams and other issues.
  • Refer to the Canon PIXMA MG5790 user manual for detailed instructions and troubleshooting assistance.

Download Canon PIXMA MG5790 Driver

Ensure your device is fully compatible with the latest drivers for the Canon PIXMA MG5790. Downloading and installing the correct driver software is essential for optimal functionality and performance.

Download Driver