Canon PIXMA MP390 – Driver Download, Setup and User Guide

Advertisement

How to Set Up the Canon PIXMA MP390 Printer

Step-by-Step Guide

1. Unpack the Printer

  • Remove the printer from the box and place it on a stable, level surface.
  • Remove all protective packaging materials.

2. Install the Ink Cartridges

  • Open the front cover and lift the cartridge holder.
  • Remove the orange protective caps from the cartridges.
  • Align the cartridge with the corresponding color and insert it into the holder.
  • Gently push down on the cartridge until it clicks into place.

3. Install the Paper

  • Open the rear paper tray.
  • Adjust the paper guides to fit the size and type of paper you are using.
  • Insert the paper into the tray and slide it forward until it stops.

4. Connect the Printer

  • Connect the power cord to the printer and a power outlet.
  • Connect the printer to your computer using a USB cable (included).

5. Install the Software

  • Insert the included software CD-ROM into your computer.
  • Follow the on-screen instructions to install the printer driver and software.

6. Align the Print Heads

  • Once the software installation is complete, the printer will prompt you to align the print heads.
  • Follow the instructions on the LCD screen to complete the alignment process.

7. Test Print

  • Print a test page to make sure the printer is working correctly.
  • The test page should show all of the colors and patterns clearly.

Troubleshooting Common Issues

Printer Not Recognized by Computer

  • Check that the USB cable is securely connected to both the printer and the computer.
  • Restart the printer and the computer.
  • Update the printer driver.

Paper Jams

  • Carefully remove the paper from the paper tray and gently pull it out of the printer.
  • Check for any debris or obstructions that may have caused the jam.
  • Adjust the paper guides to ensure they are not too tight.

Poor Print Quality

  • Check if the ink cartridges are installed correctly.
  • Clean the print heads.
  • Ensure that you are using the correct paper type for the print job.
  • Run the print head alignment procedure again.

LCD Screen Not Displaying

  • Ensure that the printer is connected to a power outlet.
  • Check the power cord for any damage.
  • If the printer has a battery, try replacing it.

Wi-Fi Setup Issues

  • Make sure your Wi-Fi network is active and your password is correct.
  • Reset the printer’s Wi-Fi settings and reconnect it to your network.
  • Ensure that your router’s firewall is not blocking the printer’s connection.

Additional Tips

  • Keep the printer clean and free of dust.
  • Store the ink cartridges properly to prevent drying out.
  • If you experience any persistent issues, contact Canon customer support for assistance.

Download Canon PIXMA MP390 Driver

Ensure your device is fully compatible with the latest drivers for the Canon PIXMA MP390. Downloading and installing the correct driver software is essential for optimal functionality and performance.

Download Driver