Canon PIXMA MX490 – Driver Download, Setup and User Guide

Advertisement

A Comprehensive Guide to Setting Up the Canon PIXMA MX490

Introduction

The Canon PIXMA MX490 is a versatile all-in-one printer that offers printing, scanning, copying, and faxing capabilities. Setting up the device and ensuring its smooth operation can be accomplished with the following detailed guide.

Unboxing and Hardware Preparation

  1. Remove the printer from the packaging and place it on a flat and stable surface.
  2. Open the output tray and pull out the paper cassette.
  3. Load standard letter-sized paper into the cassette and slide it back into the printer.
  4. Connect the power cord to the printer and a power outlet.
  5. Turn on the printer using the power button located on the side.

Software Installation

  1. Insert the software CD that came with the printer into your computer’s CD/DVD drive.
  2. If the installation wizard does not start automatically, browse to the CD and run the “Setup” file.
  3. Follow the on-screen instructions to complete the software installation.
  4. Once the software is installed, connect the printer to your computer using the USB cable provided.

Network Setup (Optional)

If you want to connect the printer to your network instead of directly to a computer, follow these steps:

  1. Access the printer’s menu by pressing the “Menu” button on the control panel.
  2. Navigate to the “Network Settings” section.
  3. Select “Wireless LAN Setup” and follow the prompts to establish a wireless connection.

Troubleshooting Common Issues

Printing Problems:

  • Printer does not respond: Ensure that the printer is turned on, the paper tray is loaded, and the USB cable or network connection is secure.
  • Blank pages printed: Check if the ink cartridges are installed correctly and have sufficient ink.
  • Streaked or faded print: Clean the print head by accessing the “Maintenance” section in the printer’s menu.

Scanning Problems:

  • Scanner does not scan: Make sure the scanner lid is closed properly. Check if the driver software is installed correctly.
  • Scanned images are blurry: Clean the scanner glass using a soft, damp cloth. Adjust the scan resolution for better quality.

Copying Problems:

  • Copies are blurry: Ensure that the original document is clear and placed on the scanner glass correctly.
  • Copies are too dark or light: Adjust the copy contrast settings on the printer’s control panel.

Faxing Problems:

  • Fax does not send: Verify that the fax line is connected properly and that the receiving fax number is entered correctly.
  • Received faxes are blurry: Check if the scanner glass is clean. Adjust the fax resolution settings on the printer’s control panel.

Conclusion

By following these detailed steps, you can successfully set up the Canon PIXMA MX490 for printing, scanning, copying, and faxing. Troubleshooting any common issues using the provided tips will ensure the smooth and efficient operation of your device.

Download Canon PIXMA MX490 Driver

Ensure your device is fully compatible with the latest drivers for the Canon PIXMA MX490. Downloading and installing the correct driver software is essential for optimal functionality and performance.

Download Driver