Canon PIXMA MX870 – Driver Download, Setup and User Guide

Advertisement

Setting Up the Canon PIXMA MX870: A Comprehensive Guide

Introduction

The Canon PIXMA MX870 is a versatile all-in-one printer that combines printing, scanning, copying, and faxing capabilities. Setting up this device can be a straightforward process, but following the steps provided in this guide will ensure a successful installation.

Step-by-Step Setup Guide

1. Unboxing and Assembly

  • Remove the printer from the box and all packaging materials.
  • Install the ink cartridges by aligning the colored tabs and inserting them into the corresponding slots.
  • Connect the power cord to the printer and a power outlet.

2. Install Printer Drivers

  • Insert the included software CD or visit Canon’s website to download the latest drivers compatible with your operating system.
  • Run the installation wizard and follow the prompts to complete the driver installation.

3. Connect to Wireless Network (Optional)

  • If you wish to use the printer wirelessly, navigate to the Network Settings menu on the printer’s control panel.
  • Select “Wireless Setup Wizard” and follow the prompts to search for and connect to your desired Wi-Fi network.

4. Physical Setup

  • Place the printer on a stable surface near a power outlet.
  • Adjust the paper trays according to the paper size and type you intend to use.
  • Load paper into the rear paper tray or the front cassette.

5. Printer Initialization

  • Turn on the printer and wait for it to initialize.
  • The printer may display a message asking you to confirm the ink cartridge installation. Do so by selecting “OK” or “Yes.”
  • The printer will now conduct a print head alignment, which takes a few minutes.

Troubleshooting Common Issues

1. Printer Not Recognized

  • Ensure that the printer is powered on and the power cord is securely connected.
  • Check if the USB cable (if used) is connected firmly to both the printer and your computer.
  • Update the printer drivers and restart your computer.

2. Printing Quality Issues

  • Check the ink levels and replace any empty or low cartridges.
  • Clean the print head using the built-in print head cleaning utility.
  • Ensure that the paper type selected in the printer settings matches the paper you are using.

3. Wireless Connection Problems

  • Verify that your wireless router is functioning correctly and your printer is within its range.
  • Check the Wi-Fi password and ensure it is entered accurately.
  • Reconfigure the wireless settings on the printer and reconnect to the network.

4. Scanning Issues

  • Make sure the scanning bed is clean and free of any debris.
  • Ensure that the document you are scanning is correctly placed and aligned on the scanning bed.
  • Check the scanning settings and adjust them accordingly (e.g., resolution, color depth).

5. Faxing Issues

  • Configure the fax settings, including your fax number and the receiving party’s number.
  • Check if the phone line is connected properly and the dial tone is present.
  • Verify that the fax document is correctly loaded into the document feeder or scanning bed.

Conclusion

By following the detailed instructions provided in this guide, you should be able to successfully set up your Canon PIXMA MX870 and resolve any common issues encountered during the process. Remember, if you encounter any persistent problems, refer to the user manual or contact Canon’s customer support for assistance.

Download Canon PIXMA MX870 Driver

Ensure your device is fully compatible with the latest drivers for the Canon PIXMA MX870. Downloading and installing the correct driver software is essential for optimal functionality and performance.

Download Driver