Canon PIXUS iP8730 – Driver Download, Setup and User Guide

Advertisement

A Comprehensive Guide to Setting Up the Canon PIXUS iP8730

Unboxing and Preparation

  1. Carefully unpack the printer, removing all protective materials and accessories.
  2. Remove the orange tape from the print head and power cables.
  3. Ensure that the ink cartridges are included in the box. If not, purchase genuine Canon cartridges before proceeding.

Hardware Setup

  1. Connect the Power Cable: Locate the power cable and insert one end into the back of the printer and the other end into a power outlet.
  2. Connect the USB Cable (Optional): If you prefer a wired connection, connect one end of the USB cable to the printer and the other end to a USB port on your computer. This step is optional for wireless setup.
  3. Load Paper: Open the paper tray at the front of the printer. Load a stack of letter-size paper into the tray, ensuring that the paper is facing the correct direction. Adjust the paper guides to fit the paper width.

Software Installation

  1. Install Drivers: Insert the included software CD-ROM into your computer’s drive. Follow the on-screen prompts to install the necessary drivers and software.
  2. Printer Registration: Once the installation is complete, you will be prompted to register your printer with Canon. This step is recommended but not required.

Wireless Setup

  1. Connect to Wi-Fi: Press the Wi-Fi button on the printer’s control panel. The Wi-Fi light will flash.
  2. Find the Printer Network: On your computer or mobile device, navigate to the Wi-Fi settings and search for available networks. Select the network named CanonPIXUSiP8730_XXXX.
  3. Enter the Password: The password to connect to the printer’s Wi-Fi network is printed on the label located on the back of the printer.
  4. Setup via WPS: Alternatively, you can connect to the printer wirelessly using WPS (Wi-Fi Protected Setup). Press the WPS button on the printer and the WPS button on your router within 2 minutes.

Troubleshooting Common Issues

Printer Not Detected:

  • Ensure that the printer is turned on and connected to a power outlet.
  • Check that the USB cable (if used) is properly connected to both the printer and computer.
  • Restart your computer and printer.

Paper Jams:

  • Clear the paper tray and remove any jammed paper.
  • Adjust the paper guides to fit the paper width properly.
  • Ensure that the paper is not folded, torn, or damp.

Print Quality Issues:

  • Clean the print head by following the instructions in the printer’s user manual.
  • Use high-quality, genuine Canon ink cartridges.
  • Check the paper type and settings for compatibility with the printer.

Wi-Fi Connection Problems:

  • Verify that the printer and your device are connected to the same Wi-Fi network.
  • Ensure that the Wi-Fi password is correct.
  • Try resetting the printer’s Wi-Fi settings.
  • Move the printer closer to the router to improve signal strength.

For further assistance:

  • Refer to the printer’s user manual for detailed troubleshooting steps.
  • Contact Canon customer support for additional help.

Download Canon PIXUS iP8730 Driver

Ensure your device is fully compatible with the latest drivers for the Canon PIXUS iP8730. Downloading and installing the correct driver software is essential for optimal functionality and performance.

Download Driver