Canon PIXUS MP490 – Driver Download, Setup and User Guide

Advertisement

Comprehensive Guide to Setting Up the Canon PIXUS MP490

Introduction

The Canon PIXMA MP490 is a versatile all-in-one printer that offers copying, scanning, and printing capabilities. This guide will provide step-by-step instructions on how to set up the Canon PIXMA MP490, including network connection, software installation, and troubleshooting common issues.

Step 1: Unboxing and Preparation

  1. Carefully remove the printer from the box and place it on a flat, stable surface.
  2. Open the top cover of the printer and remove the orange protective tape.
  3. Insert the included power cord into the back of the printer and connect it to a power outlet.

Step 2: Cartridge Installation

  1. Open the front cover of the printer.
  2. Remove the empty ink cartridges from their packaging.
  3. Align the new ink cartridges with the corresponding slots and gently push them in until they click into place.

Step 3: Network Connection (Optional)

For USB Connection:
1. Skip this step and proceed to Step 4.

For Wireless Connection:
1. Connect the provided USB cable between the printer and your computer.
2. Insert the included CD-ROM into your computer and follow the on-screen instructions to install the printer software.
3. During the software installation, choose the “Connect to a wireless network” option.
4. Follow the prompts to select your wireless network and enter the password.
5. Once the wireless connection is established, unplug the USB cable.

Step 4: Software Installation

  1. Insert the included CD-ROM into your computer and follow the on-screen instructions to install the printer software.
  2. Select the appropriate language and region.
  3. Choose the “Install” option and follow the prompts to complete the software installation.

Step 5: Paper Loading

  1. Open the paper tray and insert up to 100 sheets of plain paper.
  2. Slide the paper guides to fit the paper size.

Step 6: Alignment and Test Printing

  1. Once the software installation is complete, the printer will perform an alignment procedure.
  2. Follow the on-screen instructions to print a test page and verify that the alignment is correct.

Troubleshooting Common Issues

Printer Not Recognized:

  1. Check that the printer is properly connected to the computer via USB or wirelessly.
  2. Restart the computer and printer.
  3. Reinstall the printer software.

Paper Jams:

  1. Open the paper tray and remove the jammed paper.
  2. Check the paper path for any obstructions or debris.
  3. Flatten the jammed paper before reinsert it.

Printing Problems:

  1. Check the ink levels and replace empty cartridges.
  2. Clean the print heads using the printer’s built-in cleaning utility.
  3. Inspect the paper quality and use recommended paper types.

Wireless Connection Issues:

  1. Verify that the printer is connected to the same wireless network as your computer.
  2. Restart the printer and router.
  3. Re-establish the wireless connection through the printer settings menu.

Conclusion

By following these steps, you can successfully set up your Canon PIXMA MP490 and enjoy its printing, scanning, and copying capabilities. If you encounter any issues during the setup process, refer to the troubleshooting section for assistance.

Download Canon PIXUS MP490 Driver

Ensure your device is fully compatible with the latest drivers for the Canon PIXUS MP490. Downloading and installing the correct driver software is essential for optimal functionality and performance.

Download Driver