Canon SmartBase MP390 – Driver Download, Setup and User Guide

Advertisement

Comprehensive Guide to Setting Up the Canon SmartBase MP390

Step-by-Step Setup Instructions

  1. Unbox and Remove the Device: Remove the SmartBase MP390 from the packaging and discard any protective materials.
  2. Connect the Power Cable: Plug the included power cable into the MP390 and an available electrical outlet.
  3. Install the Printer Driver: Insert the included CD-ROM into your computer’s CD drive. Follow the on-screen prompts to install the necessary printer driver. If the CD is not available, download the driver from the Canon website.

  4. Connect to the Network: Connect the MP390 to your Wi-Fi network using the following methods:

    • Wi-Fi Protected Setup (WPS): Press the WPS button on your router and then the WPS button on the MP390 within 2 minutes to establish a connection.
    • Manual Setup: Open the printer properties in your computer’s settings and select the Wi-Fi network name (SSID). Enter the network password and click “Connect.”

  5. Test Printing: Print a test page to ensure the MP390 is properly connected and working.

Troubleshooting Common Issues

1. Printer Not Detected

  • Ensure the power cable is properly connected.
  • Verify that the printer driver is installed correctly.
  • Restart the printer and your computer.
  • Check if any firewalls or antivirus software is blocking the printer connection.

2. Printing Problems

  • Check if the ink cartridges are installed properly.
  • Clean the print heads by following the instructions in the printer manual.
  • Ensure the correct paper size and type is selected in the print settings.
  • Troubleshoot any paper jams or alignment issues.

3. Wi-Fi Connectivity Issues

  • Check the Wi-Fi signal strength and ensure your router is within range of the MP390.
  • Restart the router and the MP390.
  • Re-enter the Wi-Fi network password on the MP390.
  • Consider using an Ethernet cable to connect the printer directly to your router.

4. Scanner Not Working

  • Install the Canon SmartBase MP390 Scanner Driver.
  • Ensure the scanner lid is fully closed.
  • Check if any objects are blocking the scanner glass.
  • Clean the scanner glass with a lint-free cloth.

Additional Tips

  • Keep the firmware of your MP390 updated to ensure optimal performance.
  • Use genuine Canon ink cartridges for best printing results.
  • Perform regular maintenance tasks such as cleaning the printer and replacing worn parts.
  • Consult the Canon website for additional support and documentation.

Download Canon SmartBase MP390 Driver

Ensure your device is fully compatible with the latest drivers for the Canon SmartBase MP390. Downloading and installing the correct driver software is essential for optimal functionality and performance.

Download Driver