Epson Artisan 837 – Driver Download, Setup and User Guide

Advertisement

Comprehensive Guide to Setting Up Your Epson Artisan 837

Unboxing and Setup

  1. Carefully unbox the Epson Artisan 837 printer and remove all packaging materials.
  2. Place the printer on a flat, stable surface.
  3. Open the front cover and remove the protective orange tape from the printhead carriage.
  4. Install the two ink cartridges (black and color) into their respective slots.
  5. Close the front cover.
  6. Connect the power cord to the back of the printer and plug it into a power outlet.

Ink Cartridge Installation

  1. Open the front cover and remove the empty ink cartridge.
  2. Remove the new ink cartridge from its packaging.
  3. Hold the ink cartridge with the colored end facing you.
  4. Insert the ink cartridge into the empty slot, making sure it clicks into place.
  5. Repeat these steps for the other ink cartridge.

Wi-Fi Connection

Using the WPS Button:

  1. Press the “WPS” button on the printer’s control panel.
  2. Within two minutes, press the “WPS” button on your wireless router.
  3. The printer will automatically connect to your network.

Using a USB Cable:

  1. Connect a USB cable between the printer and your computer.
  2. On your computer, open the “Printers and Scanners” or “Printers” settings.
  3. Click “Add a Printer” or “Add a Device” and select the Epson Artisan 837.
  4. Follow the on-screen instructions to complete the Wi-Fi setup.

Troubleshooting Common Issues

Printing Problems:

  • Blank pages: Check if there is enough ink in the cartridges and that they are correctly installed.
  • Smudged prints: Clean the printhead by following the instructions in the printer manual.
  • Paper not feeding: Adjust the paper guides and make sure the paper tray has paper loaded properly.

Wi-Fi Problems:

  • Printer not connecting to Wi-Fi: Ensure that the printer is within range of your wireless network and that the WPS button on the printer and router are pressed correctly.
  • Printer dropping Wi-Fi connection: Check if your router is experiencing any issues or if there are any obstacles (e.g., walls) between the printer and the router.
  • Printer not appearing on the network: Reset the printer to factory settings by pressing and holding the “Stop” and “Cancel” buttons simultaneously for 5 seconds.

Other Problems:

  • Error messages: Consult the printer manual for specific error codes and their solutions.
  • Printer won’t turn on: Make sure the power cord is securely connected and that there is power in the outlet.

Additional Tips

  • Regularly clean the printer’s exterior and interior to maintain optimal performance.
  • Use genuine Epson ink cartridges for the best results.
  • Update the printer’s firmware regularly to address any performance issues.
  • If you experience persistent problems, contact Epson customer support for assistance.

Download Epson Artisan 837 Driver

Ensure your device is fully compatible with the latest drivers for the Epson Artisan 837. Downloading and installing the correct driver software is essential for optimal functionality and performance.

Download Driver