Epson EP-906F Series – Driver Download, Setup and User Guide

Advertisement

Epson EP-906F Series Setup Guide

Unboxing and Setup

  1. Unbox all components: Remove the printer, ink cartridges, power cord, and setup materials.
  2. Remove protective materials: Remove all plastic covers and tape from the printer.
  3. Install ink cartridges: Open the printer cover, remove the ink cartridge holders, and insert the appropriate cartridges into the correct slots.
  4. Connect the power cord: Plug the power cord into the printer and a power outlet.
  5. Load paper: Open the paper tray and insert the desired paper type. Adjust the paper guides to fit the paper size.

Connecting to Wi-Fi or Ethernet

Wi-Fi:

  1. Open the printer settings: Navigate to the printer’s settings menu via the LCD screen or the Epson Control Panel software.
  2. Select ‘Wi-Fi Setup’: Follow the on-screen prompts to connect the printer to your home Wi-Fi network.

Ethernet:

  1. Connect the Ethernet cable: Connect an Ethernet cable from the printer to a router or modem.
  2. Assign IP address: If your router supports DHCP, the printer will automatically obtain an IP address. Otherwise, manually configure the IP address settings in the printer’s menu.

Installing Printer Software

  1. Insert the software CD: Insert the included software CD into your computer’s drive.
  2. Run the setup wizard: The Epson Setup Navigator will guide you through the software installation process.

Troubleshooting Common Issues

Printer does not print:

  • Check if the printer is connected to the power and properly loaded with paper.
  • Ensure that the ink cartridges are installed correctly and not empty.
  • Restart the printer by turning it off and on.

Poor print quality:

  • Replace any empty or low-ink cartridges.
  • Clean the print heads by following the instructions in the printer’s menu.
  • Use high-quality paper recommended by Epson.

Printer is not recognized by the computer:

  • Make sure the printer is connected to your computer via USB or Wi-Fi.
  • Reinstall the printer software by following the steps above.
  • Try using a different USB cable.

Paper jams:

  • Clear any visible paper from the printer.
  • Open the covers and carefully remove any jammed paper, ensuring not to tear it.
  • Reset the printer by turning it off and on.

Other errors:

  • Refer to the printer’s user manual for specific error codes and solutions.
  • Contact Epson Support for assistance if the issue cannot be resolved through troubleshooting.

Download Epson EP-906F Series Driver

Ensure your device is fully compatible with the latest drivers for the Epson EP-906F Series. Downloading and installing the correct driver software is essential for optimal functionality and performance.

Download Driver