EPSON L455 Series – Driver Download, Setup and User Guide

Advertisement

Comprehensive Guide to Setting Up the EPSON L455 Printer Series

Materials Required

  • EPSON L455 printer
  • Ink bottles (black, cyan, magenta, yellow)
  • Power cord
  • USB cable (optional for wired connection)
  • Wi-Fi router or mobile device (for wireless setup)

Step-by-Step Setup

1. Unpack and Install Ink Bottles

  • Open the printer and remove any protective materials.
  • Locate the ink tanks and open their covers.
  • Fill each tank with the corresponding ink color until the level reaches the “Full” line.
  • Close the tank covers and ensure they are securely locked.

2. Connect Power and USB Cable

  • Plug the power cord into the printer and a power outlet.
  • Connect the USB cable to the printer and your computer (optional for wired setup).

3. Power On and Initialize

  • Press the power button to turn on the printer.
  • Wait for the printer to initialize and calibrate itself. This may take a few minutes.

4. Wireless Setup (Optional)

  • Using a Wi-Fi Router:
    • Press the Wi-Fi button on the printer.
    • Select your Wi-Fi network from the displayed list.
    • Enter your Wi-Fi password.
    • Wait for the printer to connect.
  • Using Epson Connect:
    • Download the Epson Connect app on your mobile device.
    • Follow the on-screen instructions to add the printer.
    • Connect your mobile device to the printer’s Wi-Fi network.
    • Enter the connection code displayed on the printer.

5. Install Software (Optional)

  • Insert the included software disc into your computer.
  • Follow the on-screen instructions to install the necessary drivers and software.
  • Choose the type of connection (USB or Wi-Fi) you want to use.

Troubleshooting Common Issues

Printer Not Printing

  • Check ink levels: Ensure the ink tanks are filled to the “Full” line.
  • Clean printhead: Run the printhead cleaning utility in the printer settings to remove any clogs.
  • Restart printer: Turn off the printer, unplug it, and then plug it back in to restart.

Paper Jam

  • Open printer covers: Check for paper jams in the front and rear trays.
  • Remove jammed paper: Gently pull out any jammed paper while holding the printer upright.
  • Reset printer: Turn off and on the printer after removing the jammed paper.

Wireless Connection Failure

  • Check Wi-Fi: Ensure your Wi-Fi network is functioning properly.
  • Check password: Confirm that you entered the correct Wi-Fi password.
  • Reset Wi-Fi: Press and hold the Wi-Fi button on the printer for 5 seconds to reset the wireless settings.

Scan Not Working

  • Check USB connection: Ensure the USB cable is securely connected to the printer and computer.
  • Enable scanner: In the printer settings, check that the scanner is enabled and configured.
  • Restart scan: Close any open scanning software, restart the printer, and try scanning again.

Print Quality Issues

  • Clean printhead: Run the printhead cleaning utility to remove any clogs or smudges.
  • Replace ink cartridges: If the print quality remains poor, consider replacing the ink cartridges.
  • Check paper type: Use the correct paper type for your printing needs to avoid smudging or banding.

Additional Tips

  • Set up the printer on a stable surface with adequate ventilation.
  • Keep ink tanks filled to avoid printhead clogging.
  • Run regular printer maintenance tasks, such as cleaning the printhead and checking for firmware updates.
  • Refer to the user manual for detailed troubleshooting and support information.

Download EPSON L455 Series Driver

Ensure your device is fully compatible with the latest drivers for the EPSON L455 Series. Downloading and installing the correct driver software is essential for optimal functionality and performance.

Download Driver