Epson PX-404A – Driver Download, Setup and User Guide

Advertisement

Epson PX-404A Setup Guide

Unboxing and Powering Up

  1. Unpack the printer and all its components.
  2. Remove all the protective packaging materials.
  3. Place the printer on a flat and stable surface.
  4. Connect the power cord to the printer and an electrical outlet.
  5. Press the power button to turn on the printer.

Installing the Ink Cartridges

  1. Open the front cover of the printer.
  2. Pull out the ink cartridge holder.
  3. Remove the old ink cartridges (if any) and insert the new ones.
    • Black cartridge goes in the left slot.
    • Color cartridge goes in the right slot.
  4. Push the ink cartridge holder back into the printer.
  5. Close the front cover.

Loading Paper

  1. Pull out the paper tray.
  2. Load plain paper into the paper tray with the printable side facing up.
  3. Adjust the paper guides to fit the paper size.
  4. Push the paper tray back into the printer.

Connecting to a Computer

USB Connection:

  1. Connect one end of the USB cable to the back of the printer.
  2. Connect the other end of the USB cable to a USB port on your computer.
  3. Install the printer driver from the provided CD or download it from the Epson website.

Wi-Fi Connection:

  1. Press the Wi-Fi button on the printer.
  2. The Wi-Fi light will start blinking.
  3. On your computer, navigate to the Wi-Fi settings and select the printer’s Wi-Fi network.
  4. Enter the password (usually found on the printer’s LCD panel or the router).
  5. Once connected, follow the on-screen instructions to complete the setup.

Troubleshooting Common Issues

Printer Not Printing

  • Ensure the printer is powered on and connected to your computer.
  • Check if there is paper loaded in the paper tray.
  • Make sure the ink cartridges are properly installed.
  • Clean the print heads by following the instructions in the printer’s manual.

Print Quality Issues

  • Replace old or low-quality ink cartridges.
  • Perform a nozzle check to ensure the print heads are not clogged.
  • Adjust the print settings to a higher quality mode.

Wireless Connection Problems

  • Ensure your Wi-Fi router is turned on and in range of the printer.
  • Check if the Wi-Fi light on the printer is blinking. If not, press the Wi-Fi button to connect.
  • Reset the Wi-Fi settings on the printer by pressing and holding the Wi-Fi button for 5 seconds.

Other Issues

  • Paper Jams: Remove the paper jam and inspect the printer for any damage.
  • Error Messages: Refer to the printer’s manual for specific error messages and troubleshoot accordingly.
  • Driver Issues: Reinstall or update the printer driver.

Download Epson PX-404A Driver

Ensure your device is fully compatible with the latest drivers for the Epson PX-404A. Downloading and installing the correct driver software is essential for optimal functionality and performance.

Download Driver