Epson Stylus Office TX600FW – Driver Download, Setup and User Guide

Advertisement

Epson Stylus Office TX600FW Setup Guide

Step 1: Unbox and Assemble the Printer

  • Carefully remove all components from the box.
  • Place the printer on a flat surface and insert the paper tray into the bottom front of the device.
  • Open the scanner lid and remove any protective packaging.

Step 2: Connect the Cables

  • Connect the power cable to both the printer and an electrical outlet.
  • Connect the USB cable from the printer to your computer’s USB port.
  • For wireless setup, refer to the section “Wireless Setup” below.

Step 3: Install Software and Drivers

  • Insert the included CD-ROM into your computer’s disk drive.
  • Follow the on-screen instructions to install the software and drivers.
  • Once the installation is complete, restart your computer if prompted.

Step 4: Load Paper and Ink

  • Open the front cover of the printer.
  • Load paper into the paper tray and adjust the paper guides according to the paper size.
  • Open the ink cartridge protector and remove the orange tape from the new ink cartridges.
  • Insert the ink cartridges into their designated slots and close the protector.

Step 5: Alignment and Nozzle Check

  • The printer will automatically print an alignment page after loading paper and ink.
  • Scan the alignment page using the scanner lid and follow the on-screen instructions for alignment.
  • After alignment, print a nozzle check pattern to ensure all nozzles are functioning properly.

Wireless Setup

  • Turn on the printer and navigate to the “Menu” button on the control panel.
  • Select “Network Settings” -> “Wireless LAN Setup” -> “Connect”.
  • Select your wireless network and enter the password if required.
  • Wait for the printer to connect to the network.

Troubleshooting Common Issues

Printer Not Printing:

  • Check if the printer is turned on and connected to the computer or network.
  • Ensure that paper is loaded correctly and the paper guides are adjusted.
  • Check if the ink cartridges are installed properly and have sufficient ink.
  • Run a nozzle check to verify that all nozzles are functioning.

Scanner Not Working:

  • Check if the scanner lid is fully open and the document is placed correctly on the glass.
  • Ensure that the scanner drivers are installed and up-to-date.
  • Clean the scanner glass and the document guide with a soft cloth.

Wi-Fi Connection Issues:

  • Verify that the printer and your computer are connected to the same wireless network.
  • Check if the network password is correct.
  • Reset the printer’s Wi-Fi settings and reconfigure the connection.

Paper Jam:

  • Open the front cover of the printer and carefully remove any jammed paper.
  • Ensure that the paper is not folded or torn.
  • Clean the paper feed rollers with a soft cloth.

Download Epson Stylus Office TX600FW Driver

Ensure your device is fully compatible with the latest drivers for the Epson Stylus Office TX600FW. Downloading and installing the correct driver software is essential for optimal functionality and performance.

Download Driver