Epson Stylus Photo 1400 – Driver Download, Setup and User Guide

Advertisement

Epson Stylus Photo 1400 Setup Guide

Unboxing and Assembly

  1. Carefully unpack the printer from the box.
  2. Remove all protective packaging materials.
  3. Place the printer on a sturdy, level surface.
  4. Open the printer cover and remove the orange protective tape from the print head.
  5. Install the print head by aligning the arrow on the head with the corresponding mark on the carriage.
  6. Gently push down on the print head to lock it in place.
  7. Close the printer cover.

Ink Cartridge Installation

  1. Open the ink cartridge access door.
  2. Remove the orange protective cap from each ink cartridge.
  3. Insert the cartridges into the corresponding slots, aligning the colored dots on the cartridges with the dots on the slots.
  4. Push firmly on the cartridges until they click into place.
  5. Close the ink cartridge access door.
  6. Run the printer’s alignment procedure by following the on-screen instructions.

Paper Loading

  1. Open the paper support flap.
  2. Pull out the paper tray.
  3. Load the desired paper into the tray, ensuring that the paper is facing up and the print surface is facing the front of the tray.
  4. Adjust the paper guides to match the width of the paper.
  5. Push the paper tray back into the printer until it clicks into place.
  6. Close the paper support flap.

Software Installation

  1. Insert the Epson software CD into your computer.
  2. Follow the on-screen installation instructions to install the printer driver and software.
  3. Once the software is installed, connect the printer to your computer via USB cable.

Troubleshooting Common Issues

Printing Blank Pages

  • Check if the ink cartridges are installed correctly and have sufficient ink.
  • Make sure that the paper is loaded correctly and is of the correct type for your printer.
  • Clean the print head by running the printer’s cleaning utility.
  • Reset the printer by turning it off and on again.

Smudged or Streaked Prints

  • Clean the nozzles by running the printer’s cleaning utility.
  • Align the print head by following the printer’s alignment procedure.
  • Use higher quality paper designed for photo printing.
  • Check if the ink cartridges are compatible with your printer and have sufficient ink.

Paper Jams

  • Remove the paper from the paper tray and inspect it for any tears or debris.
  • Open the printer cover and remove any jammed paper from the print path.
  • Close the printer cover and restart the print job.
  • If the paper jam persists, contact Epson support.

Power Issues

  • Make sure that the printer is plugged into a working power outlet.
  • Check if the power cord is securely connected to the printer and the outlet.
  • Restart the printer by turning it off and on again.
  • If the power issue persists, contact Epson support.

Additional Tips for Optimal Performance

  • Use original Epson ink cartridges for best results.
  • Clean the print head regularly to prevent clogging.
  • Store the printer in a cool, dry environment when not in use.
  • Keep the printer firmware up to date for improved performance and bug fixes.
  • Refer to the user manual for additional troubleshooting tips and detailed instructions.

Download Epson Stylus Photo 1400 Driver

Ensure your device is fully compatible with the latest drivers for the Epson Stylus Photo 1400. Downloading and installing the correct driver software is essential for optimal functionality and performance.

Download Driver