Epson Stylus Photo RX590 – Driver Download, Setup and User Guide

Advertisement

Comprehensive Guide to Setting Up the Epson Stylus Photo RX590

Unpacking and Assembly

  1. Open the box and remove all components carefully.
  2. Set up the paper cassette by unfolding its wings and placing it in the designated slot.
  3. Insert the cartridges into the printer. Make sure they’re firmly seated and color-matched with the corresponding slots.

Software Installation

  1. Insert the included CD into your computer’s CD-ROM drive.
  2. Follow the on-screen instructions to install the printer driver, software, and any necessary utilities.
  3. Connect the printer to your computer using the USB cable provided.

Network Setup (Optional)

  1. Power on the printer.
  2. Press the “Wi-Fi” button on the printer’s control panel.
  3. Enter the Wi-Fi password for your network.
  4. Once connected, you can print wirelessly from your network devices.

Paper Loading

  1. Open the paper support flap.
  2. Slide the paper width guide to adjust it to the size of your paper.
  3. Insert the paper into the paper cassette.
  4. Close the paper support flap.

Printing

  1. Open the document or image you want to print.
  2. Click “File” > “Print” and select the Epson Stylus Photo RX590 printer.
  3. Adjust any printing settings as desired, such as quality, paper size, and duplexing.
  4. Click “Print” to start the printing process.

Troubleshooting Common Issues

No Power

  • Check if the power cord is securely plugged into both the printer and a power outlet.
  • Reset the printer by unplugging it for 30 seconds and plugging it back in.

Print Quality Issues

  • Check if the cartridges are low on ink and replace if necessary.
  • Clean the print head by following the instructions in the printer’s user manual.
  • Use high-quality paper specifically designed for inkjet printers.

Paper Jams

  • Open the printer’s rear access door and gently remove any jammed paper.
  • Ensure that the paper is loaded correctly and the paper width guide is set properly.

Wi-Fi Connection Problems

  • Check if your computer and printer are on the same Wi-Fi network.
  • Re-enter the Wi-Fi password on the printer’s control panel.
  • Reset the printer’s network settings by pressing and holding the “Wi-Fi” button for 5 seconds.

Software Not Detected

  • Reinstall the printer driver and software.
  • Make sure the printer is connected to your computer before installing the software.
  • Disconnect and reconnect the USB cable to ensure a secure connection.

Additional Tips

  • Keep the printer clean to prevent dust and debris buildup.
  • Use genuine Epson ink cartridges for best results.
  • Download the latest firmware updates for your printer to improve performance and resolve bugs.

Download Epson Stylus Photo RX590 Driver

Ensure your device is fully compatible with the latest drivers for the Epson Stylus Photo RX590. Downloading and installing the correct driver software is essential for optimal functionality and performance.

Download Driver