Epson Stylus Photo TX700W – Driver Download, Setup and User Guide

Advertisement

Setting Up the Epson Stylus Photo TX700W: A Detailed Guide

Unboxing and Setup

  1. Unbox the printer: Carefully remove the printer from the box and discard the packaging.
  2. Install the ink cartridges: Open the printer cover and insert the supplied ink cartridges into the corresponding slots. Close the cover securely.
  3. Connect to power: Plug the printer’s power cord into a grounded outlet.
  4. Load paper: Open the paper tray and insert plain or photo paper according to the alignment guide. Close the tray.
  5. Install the software: Insert the included CD-ROM into your computer and follow the on-screen prompts to install the necessary software.

Wireless Connection

  1. Enable Wi-Fi: Press the “Wi-Fi” button on the printer control panel and hold it until the Wi-Fi light flashes.
  2. Connect to the Wi-Fi network: Go to your computer’s Wi-Fi settings and select the “Epson Stylus Photo TX700W” network. Enter the default Wi-Fi password from the printer’s label or Wi-Fi configuration sheet.
  3. Install the printer: Once connected, open the installed software on your computer and follow the prompts to add the printer.

Troubleshooting Common Issues

1. Printer not recognized:

  • Ensure the USB cable is securely connected to both the printer and computer.
  • Try a different USB cable.
  • Restart the printer and computer.

2. Print quality issues:

  • Check the ink levels and replace empty cartridges.
  • Clean the print heads using the software maintenance utility.
  • Make sure the appropriate paper type is selected in the software.

3. Wi-Fi connection problems:

  • Ensure the printer is close enough to the router for a strong signal.
  • Reset the printer’s Wi-Fi settings by pressing and holding the “Wi-Fi” button for 10 seconds.
  • Check if the firewall or antivirus software on your computer is blocking the printer’s connection.

4. Printer not printing:

  • Check if there is paper loaded in the tray.
  • Ensure the printer is turned on and connected to power.
  • Reset the printer by unplugging it for 30 seconds and plugging it back in.

5. Error messages:

  • Ink cartridge error: Replace the faulty ink cartridge with a new one.
  • Paper jam: Open the paper tray and carefully remove any jammed paper.
  • Service required: Contact Epson Support for technical assistance.

Download Epson Stylus Photo TX700W Driver

Ensure your device is fully compatible with the latest drivers for the Epson Stylus Photo TX700W. Downloading and installing the correct driver software is essential for optimal functionality and performance.

Download Driver