Epson TX320 WorkForce320 – Driver Download, Setup and User Guide

Advertisement

Setting Up the Epson TX320 WorkForce320

Unboxing and Preparation

  1. Unpack the printer and remove all packaging materials.
  2. Remove the protective tape from the printer and cartridges.
  3. Lift the scanner unit and remove the orange shipping tape.
  4. Install the ink cartridges by lifting the printer cover and inserting them into the designated slots. Press down until they click into place.
  5. Close the printer cover.

Connecting the Printer

Wi-Fi:

  1. Press the Wi-Fi button on the printer. The Wi-Fi light will start blinking.
  2. On your computer or mobile device, connect to the Epson TX320 Wi-Fi network. The network name will be “EpsonXXXX”, where XXXX represents the last four digits of your printer’s serial number.
  3. Once connected, follow the on-screen instructions to complete the Wi-Fi setup.

USB:

  1. Connect one end of the USB cable to the USB port on the back of the printer.
  2. Connect the other end to an available USB port on your computer.
  3. Install the printer driver from the included CD or Epson website.

Troubleshooting Common Issues

Printer Not Turning On:

  • Ensure that the power cord is securely connected to both the printer and an electrical outlet.
  • Try turning the printer off and back on.
  • If the issue persists, contact Epson support.

Paper Jam:

  • Open the paper tray and remove any jammed paper.
  • Close the paper tray and try printing again.
  • If the issue persists, open the printer cover and remove the paper jam from the rollers.

Print Quality Issues:

  • Clean the print head by following the instructions in the printer’s user manual.
  • Replace the ink cartridges if they are low or empty.
  • Adjust the print settings in the printer driver to ensure high-quality printing.

Wi-Fi Connection Problems:

  • Ensure that your router is turned on and within range of the printer.
  • Check that the Wi-Fi password is entered correctly.
  • Reset the printer’s Wi-Fi settings by pressing and holding the Wi-Fi button for 10 seconds.

USB Connection Problems:

  • Ensure that the USB cable is securely connected to both the printer and your computer.
  • Try using a different USB cable.
  • Update the printer driver from the Epson website.

Additional Tips

  • Use genuine Epson ink cartridges for optimal performance.
  • Clean the printer regularly to prevent buildup of ink and dust.
  • Perform regular firmware updates to enhance printer functionality.
  • Store the printer in a dry and well-ventilated area when not in use.

Download Epson TX320 WorkForce320 Driver

Ensure your device is fully compatible with the latest drivers for the Epson TX320 WorkForce320. Downloading and installing the correct driver software is essential for optimal functionality and performance.

Download Driver