EPSON WF-2650 Series – Driver Download, Setup and User Guide

Advertisement

Comprehensive Guide to Setting Up Your EPSON WF-2650 Series Printer

Step 1: Unboxing and Initial Setup

  1. Carefully remove the printer from its packaging and discard any protective materials.
  2. Place the printer on a flat, stable surface in a well-ventilated area.
  3. Remove the protective tape from the print head.

Step 2: Inserting Ink Cartridges

  1. Pull down the top cover to access the ink cartridge holders.
  2. Remove the protective orange caps from the ink cartridges.
  3. Align the ink cartridge with its designated slot and insert it firmly.
  4. Repeat for all four ink cartridges (black, cyan, magenta, yellow).
  5. Close the top cover securely.

Step 3: Connecting to Power and Network

  1. Connect the power cord to the printer and a power outlet.
  2. Connect the printer to your Wi-Fi network using the following steps:
    • Press the Wi-Fi button on the printer’s control panel.
    • Select your Wi-Fi network from the list.
    • Enter your Wi-Fi password when prompted.

Step 4: Installing Software and Drivers

  1. Visit the EPSON website (https://epson.com/Support/Printers/All-In-Ones/WorkForce-Series/Epson-WorkForce-WF-2650-All-in-One-Printer/s/SPT_C11CF10201) to download the latest software and drivers.
  2. Follow the on-screen instructions to install the software and drivers.
  3. During installation, you will be prompted to connect the printer to your computer. Choose your connection method (Wi-Fi or USB cable).

Troubleshooting Common Issues

1. Printer Won’t Connect to Wi-Fi:

  • Check if your Wi-Fi network is active and connected.
  • Verify that you entered the correct Wi-Fi password.
  • Restart the printer and your router.
  • Reset the printer’s Wi-Fi settings by pressing the Wi-Fi and Reset buttons simultaneously for 5 seconds.

2. Poor Print Quality:

  • Clean the print head using the built-in cleaning utility in the printer’s software.
  • Replace the ink cartridges if they are empty or nearing end of life.
  • Ensure that the paper you are using is compatible with your printer.
  • Adjust the print quality settings in the printer’s software.

3. Paper Jams:

  • Gently remove the jammed paper from the paper path.
  • Make sure the paper is properly loaded in the paper tray.
  • Check if the paper tray is overloaded or contains crumpled or torn paper.
  • Restart the printer to reset the paper feed mechanism.

4. Error Messages:

  • Refer to the printer’s user manual or the EPSON website for specific error codes and troubleshooting instructions.
  • Common error messages include:
    • “Ink Pad is at the End of Its Service Life”: Contact EPSON support for replacement.
    • “Printer Needs Service”: Reset the printer by unplugging it for several minutes.
    • “Paper Jam”: Remove the jammed paper and restart the printer.

5. Printer Not Recognized by Computer:

  • Ensure that the printer is connected to your computer properly.
  • Restart the computer and the printer.
  • Reinstall the printer software and drivers.
  • Try using a different USB cable or connection method (Wi-Fi).

Additional Tips:

  • Register your printer with EPSON for extended warranty and support.
  • Keep the printer firmware up-to-date by checking for updates on the EPSON website.
  • Use genuine EPSON ink cartridges to ensure optimal print quality and printer longevity.

Download EPSON WF-2650 Series Driver

Ensure your device is fully compatible with the latest drivers for the EPSON WF-2650 Series. Downloading and installing the correct driver software is essential for optimal functionality and performance.

Download Driver