EPSON WF-8090 Series – Driver Download, Setup and User Guide

Advertisement

Comprehensive Guide to Setting Up the EPSON WorkForce WF-8090 Series

Unboxing and Initial Setup

  1. Unpack the printer: Carefully remove the printer from the box and place it on a stable surface.
  2. Connect to power: Plug the included power cord into an outlet and connect it to the printer.
  3. Install ink cartridges: Open the printer cover and remove the orange caps from the ink cartridges. Insert each cartridge into its designated slot and press firmly until it clicks into place.

Network Setup

  1. Wired connection: Connect an Ethernet cable from your router to the Ethernet port on the back of the printer.
  2. Wireless connection: Navigate to the printer’s “Network” settings and select the “Wi-Fi Setup Wizard.” Follow the on-screen instructions to connect to your wireless network.

Driver Installation

Windows:

  1. Insert the included CD-ROM or download the latest drivers from Epson’s website.
  2. Run the installation wizard and follow the on-screen instructions.

Mac:

  1. Download the appropriate driver from Epson’s website.
  2. Open the downloaded .dmg file and follow the installation wizard.

Paper Loading

  1. Load plain paper: Lift the scanner cover and adjust the paper guides to the correct paper size. Load up to 250 sheets of plain paper into the rear tray.
  2. Load special paper: For specialty paper, such as envelopes or labels, open the single-sheet bypass tray and insert the paper face up.

Troubleshooting Common Issues

Printer Not Connecting to Wi-Fi

  • Ensure the printer is within range of your router.
  • Check if the Wi-Fi is enabled on the printer.
  • Reset the printer’s network settings and try connecting again.

Paper Jams

  • Remove any jammed paper carefully, ensuring not to tear it.
  • Check the paper guides for proper alignment.
  • If the paper is repeatedly jamming, contact Epson support.

Print Quality Issues

  • Faded or blurry prints: Check if the ink cartridges are properly installed and have sufficient ink.
  • Lines or streaks on prints: Clean the printer nozzles using the “Head Cleaning” utility in the printer’s settings.
  • Incorrect colors: Ensure the color management settings in your printing software are correct.

Other Issues

  • Printer not turning on: Check the power connection and try pressing the power button again.
  • Scanner not working: Ensure the scanner cover is properly closed and try restarting the printer.
  • Error messages: Refer to the printer’s manual for specific error message solutions.

Additional Tips

  • Use high-quality paper: For optimal print quality, use Epson-recommended paper.
  • Maintain your printer: Perform regular head cleanings and replace ink cartridges as needed.
  • Download the Epson Print App: Control your printer remotely and access additional features with the Epson Print App.

By following these steps, you can successfully set up and troubleshoot your EPSON WorkForce WF-8090 Series printer. For further assistance, please refer to the printer’s manual or contact Epson support.

Download EPSON WF-8090 Series Driver

Ensure your device is fully compatible with the latest drivers for the EPSON WF-8090 Series. Downloading and installing the correct driver software is essential for optimal functionality and performance.

Download Driver