Epson WorkForce 845 – Driver Download, Setup and User Guide

Advertisement

Epson WorkForce 845: Comprehensive Setup Guide

Unboxing and Setup

  1. Unbox the printer: Carefully remove the printer from the box and place it on a stable surface.
  2. Install the ink cartridges: Open the printer lid and lift the cartridge carrier. Install the four ink cartridges (black, cyan, magenta, yellow) as indicated by the color-coded labels.
  3. Load paper: Select a paper size and load it into the rear paper tray. Ensure the paper is properly aligned and does not exceed the maximum capacity.
  4. Connect the power cord: Plug the power cord into the power outlet and connect the other end to the printer.
  5. Turn on the printer: Press the Power button on the printer’s control panel.

Software Installation

  1. Download the drivers: Visit the Epson website to download the latest printer drivers for your operating system.
  2. Install the software: Run the downloaded installer file and follow the on-screen instructions to complete the software installation.
  3. Connect the printer: Connect the printer to your computer using a USB cable (included in the box) or via a wireless network (refer to your router’s manual for instructions).

Network Configuration (Wireless)

  1. Access the printer’s menu: Go to the printer’s control panel and press the Wi-Fi button to access the Wi-Fi menu.
  2. Select a network: From the list of available networks, select your desired Wi-Fi network.
  3. Enter the password: Enter the Wi-Fi password and press OK.
  4. Print a network test page: Once connected, print a network test page from the printer’s control panel to verify network connectivity.

Troubleshooting Common Issues

Printing Issues

  • Blank pages: Ensure there is ink in the cartridges and paper in the tray. Check if the cartridges are properly installed.
  • Faded or smudged prints: Replace the ink cartridges with new ones. Adjust the print quality settings to “High.”
  • Paper jams: Carefully remove any jammed paper from the paper path. Ensure the paper is properly aligned and not wrinkled.

Connection Issues

  • Cannot connect to the Wi-Fi network: Ensure the printer is within range of the router. Check if the Wi-Fi password is correct. Reset the printer’s Wi-Fi settings and re-connect.
  • Cannot connect via USB: Ensure the USB cable is properly connected to both the printer and the computer. Try a different USB cable or port.

Software Issues

  • Printer not recognized: Restart your computer and ensure the printer drivers are installed correctly. Try reinstalling the drivers from the Epson website.
  • Cannot print from a certain application: Check if the printer is selected as the default printer in the application’s settings. Ensure the printer is powered on and connected.

Other Issues

  • Error messages: Observe the specific error message displayed on the printer’s control panel. Refer to the user manual or Epson support website for instructions on resolving the issue.
  • Loud noises: Ensure the printer is placed on a stable surface. If the noise persists, contact Epson support.

Download Epson WorkForce 845 Driver

Ensure your device is fully compatible with the latest drivers for the Epson WorkForce 845. Downloading and installing the correct driver software is essential for optimal functionality and performance.

Download Driver