HP Color LaserJet 4600 Printer – Driver Download, Setup and User Guide

Advertisement

HP Color LaserJet 4600 Printer Setup Guide

Unpacking and Assembly

  1. Unpack the printer: Remove the printer from the box and place it on a flat, stable surface.
  2. Remove the packaging materials: Unpack all the components, including the toner cartridges, power cord, and USB cable.
  3. Install the toner cartridges: Open the front cover and insert the toner cartridges into the corresponding slots. Ensure they snap into place securely.
  4. Close the front cover: Close the front cover tightly.

Hardware Setup

  1. Connect the power cord: Plug the power cord into a grounded electrical outlet and the power inlet on the back of the printer.
  2. Connect the USB cable (optional): If you want to connect the printer directly to your computer, use a USB cable and plug it into the USB port on the printer and the USB port on your computer.
  3. Turn on the printer: Press the power button on the top-right corner of the printer.

Software Installation

  1. Insert the software disc: Insert the HP software disc into your computer’s optical drive.
  2. Run the setup wizard: The setup wizard will automatically start. Follow the on-screen instructions to complete the software installation.
  3. Choose your connection method: Select whether you want to connect the printer via USB or a network.
  4. Complete the installation: Follow the remaining prompts to finish the software installation.

Troubleshooting Common Issues

Printer won’t turn on:

  • Ensure the power cord is securely connected at both ends.
  • Check if the electrical outlet is working by plugging in another device.
  • Try resetting the printer by unplugging it for 30 seconds and plugging it back in.

Printer does not print:

  • Check if the printer is out of paper or toner.
  • Ensure the print job is not paused or canceled.
  • Check the printer settings and ensure the correct paper size and type are selected.
  • Verify that the printer is set as the default printer on your computer.

There are lines or streaks on printed pages:

  • Clean the toner cartridges by following the instructions in the printer’s user manual.
  • Replace any empty or faulty toner cartridges.
  • Check if the paper is of good quality and is compatible with the printer.

Printer is disconnecting from the network:

  • Ensure the printer is within range of the wireless router.
  • Check if the wireless router is working properly.
  • Try restarting the printer and the wireless router.
  • Update the printer’s firmware to the latest version.

Other issues:

  • Refer to the printer’s user manual for specific error codes or messages and recommended troubleshooting steps.
  • Contact HP customer support for further assistance.

Download HP Color LaserJet 4600 Printer Driver

Ensure your device is fully compatible with the latest drivers for the HP Color LaserJet 4600 Printer. Downloading and installing the correct driver software is essential for optimal functionality and performance.

Download Driver