HP Color LaserJet 4650n Printer – Driver Download, Setup and User Guide

Advertisement

Comprehensive Guide to Setting Up HP Color LaserJet 4650n Printer

Introduction

The HP Color LaserJet 4650n is a reliable and efficient laser printer designed for small to medium-sized businesses. This guide will provide you with detailed instructions on setting up your printer, connecting it to your network, and resolving common issues.

Unboxing and Setup

  1. Unpack the printer: Carefully remove the printer from its box and discard the packaging.
  2. Place the printer: Choose a well-ventilated location with ample space around it. Avoid placing it near heat sources or in direct sunlight.
  3. Install the toner cartridges: Open the front cover of the printer and remove the protective tape from the toner cartridges. Insert the cartridges firmly into their designated slots.
  4. Load the paper: Lift the paper tray and load it with the appropriate size and type of paper. Adjust the paper guides to fit the paper width.

Network Connection

  1. Connect the Ethernet cable: Plug one end of an Ethernet cable into the port on the back of the printer and the other end into a network port on your router or switch.
  2. Configure the network settings: Power on the printer and navigate to the “Network Configuration” menu. Select “Wired Network” and follow the on-screen prompts to configure the IP address, subnet mask, and default gateway.
  3. Test the connection: Print a network configuration page to verify that the printer is connected to the network.

Software and Driver Installation

  1. Download the drivers: Visit the HP website and download the latest drivers for the HP Color LaserJet 4650n.
  2. Run the installer: Double-click on the downloaded file to launch the installer wizard. Follow the on-screen instructions to complete the software installation.
  3. Add the printer: During the installation process, you will be prompted to add the printer. Select “Network Printer” and enter the IP address of your printer.

Troubleshooting Common Issues

1. Printer Not Powering On:

  • Check if the power cable is securely connected to the printer and the power outlet.
  • Reset the printer by unplugging it for 60 seconds and plugging it back in.

2. Printer Not Printing:

  • Ensure that the printer is connected to the network and powered on.
  • Check if the paper tray is loaded with paper and the paper guides are adjusted correctly.
  • Restart the print job or try printing a test page.

3. Paper Jams:

  • Open the front or rear cover of the printer to locate the jam.
  • Gently remove the jammed paper and make sure there are no obstructions.
  • Ensure that the paper is properly aligned and the paper guides are not too tight.

4. Print Quality Issues:

  • Replace the toner cartridges if they are low or empty.
  • Adjust the print quality settings in the printer driver or printing software.
  • Inspect the paper for any dirt or debris that could affect the print quality.

5. Network Connectivity Problems:

  • Ping the printer’s IP address from a computer to verify network connectivity.
  • Check the Ethernet cable and ensure it is securely connected at both ends.
  • If using a wireless connection, check for interference or weak signal strength.

Conclusion

Following these steps should help you successfully set up your HP Color LaserJet 4650n printer and resolve any common issues that may arise. Enjoy the convenience and productivity offered by this reliable and efficient printing solution.

Download HP Color LaserJet 4650n Printer Driver

Ensure your device is fully compatible with the latest drivers for the HP Color LaserJet 4650n Printer. Downloading and installing the correct driver software is essential for optimal functionality and performance.

Download Driver